systemd.index.7

SYSTEMD.INDEX

NAME
3
B
C
D
E
F
H
I
J
K
L
M
N
O
P
R
S
T
U
V
SEE ALSO

---

NAME

systemd.index − List all manpages from the systemd project

3

30-systemd-environment-d-generator(8) — Load variables specified by environment.d

B

binfmt.d(5) — Configure additional binary formats for executables at boot **
bootctl**(1) — Control EFI firmware boot settings and manage boot loader **
bootup**(7) — System bootup process **
busctl**(1) — Introspect the bus

C

capsule@.service(5) — System unit for the capsule service manager **
coredump.conf**(5) — Core dump storage configuration files **
coredump.conf.d**(5) — Core dump storage configuration files **
coredumpctl**(1) — Retrieve and process saved core dumps and metadata **
crypttab**(5) — Configuration for encrypted block devices

D

daemon(7) — Writing and packaging system daemons **
dnssec-trust-anchors.d**(5) — DNSSEC trust anchor configuration files

E

environment.d(5) — Definition of user service environment **
extension-release**(5) — Operating system identification

F

file-hierarchy(7) — File system hierarchy overview

H

halt(8) — Power off, reboot, or halt the machine **
hostname**(5) — Local hostname configuration file **
hostnamectl**(1) — Control the system hostname **
hwdb**(7) — Hardware Database

I

importctl(1) — Download, import or export disk images **
init**(1) — systemd system and service manager **
initrd-release**(5) — Operating system identification **
integritytab**(5) — Configuration for integrity block devices **
iocost.conf**(5) — Configuration files for the iocost solution manager

J

journal-remote.conf(5) — Configuration files for the service accepting remote journal uploads **
journal-remote.conf.d**(5) — Configuration files for the service accepting remote journal uploads **
journal-upload.conf**(5) — Configuration files for the journal upload service **
journal-upload.conf.d**(5) — Configuration files for the journal upload service **
journalctl**(1) — Print log entries from the systemd journal **
journald.conf**(5) — Journal service configuration files **
journald.conf.d**(5) — Journal service configuration files **
journald@.conf**(5) — Journal service configuration files

K

kernel-command-line(7) — Kernel command line parameters **
kernel-install**(8) — Add and remove kernel and initrd images to and from the boot partition

L

libnss_myhostname.so.2(8) — Hostname resolution for the locally configured system hostname **
libnss_mymachines.so.2**(8) — Hostname resolution for local container instances **
libnss_resolve.so.2**(8) — Hostname resolution via systemd−resolved.service **
libnss_systemd.so.2**(8) — UNIX user and group name resolution for user/group lookup via Varlink **
libsystemd**(3) — Functions for implementing services and interacting with systemd **
libudev**(3) — API for enumerating and introspecting local devices **
linuxaa64.efi.stub**(7) — A simple UEFI kernel boot stub **
linuxia32.efi.stub**(7) — A simple UEFI kernel boot stub **
linuxx64.efi.stub**(7) — A simple UEFI kernel boot stub **
loader.conf**(5) — Configuration file for systemd−boot **
locale.conf**(5) — Configuration file for locale settings **
localectl**(1) — Control the system locale and keyboard layout settings **
localtime**(5) — Local timezone configuration file **
loginctl**(1) — Control the systemd login manager **
logind.conf**(5) — Login manager configuration files **
logind.conf.d**(5) — Login manager configuration files

M

machine-id(5) — Local machine ID configuration file **
machine-info**(5) — Local machine information file **
machinectl**(1) — Control the systemd machine manager **
modules-load.d**(5) — Configure kernel modules to load at boot **
mount.ddi**(1) — Dissect Discoverable Disk Images (DDIs)

N

nss-myhostname(8) — Hostname resolution for the locally configured system hostname **
nss-mymachines**(8) — Hostname resolution for local container instances **
nss-resolve**(8) — Hostname resolution via systemd−resolved.service **
nss-systemd**(8) — UNIX user and group name resolution for user/group lookup via Varlink

O

oomctl(1) — Analyze the state stored in systemd−oomd **
oomd.conf**(5) — Global systemd−oomd configuration files **
oomd.conf.d**(5) — Global systemd−oomd configuration files **
org.freedesktop.hostname1**(5) — The D−Bus interface of systemd−hostnamed **
org.freedesktop.import1**(5) — The D−Bus interface of systemd−importd **
org.freedesktop.locale1**(5) — The D−Bus interface of systemd−localed **
org.freedesktop.LogControl1**(5) — D−Bus interface to query and set logging configuration **
org.freedesktop.login1**(5) — The D−Bus interface of systemd−logind **
org.freedesktop.machine1**(5) — The D−Bus interface of systemd−machined **
org.freedesktop.oom1**(5) — The D−Bus interface of systemd−oomd **
org.freedesktop.resolve1**(5) — The D−Bus interface of systemd−resolved **
org.freedesktop.systemd1**(5) — The D−Bus interface of systemd **
org.freedesktop.timedate1**(5) — The D−Bus interface of systemd−timedated **
os-release**(5) — Operating system identification

P

pam_systemd(8) — Register user sessions in the systemd login manager **
pam_systemd_loadkey**(8) — Read password from kernel keyring and set it as PAM authtok **
poweroff**(8) — Power off, reboot, or halt the machine **
pstore.conf**(5) — PStore configuration file **
pstore.conf.d**(5) — PStore configuration file

R

rc-local.service(8) — Compatibility generator and service to start /etc/rc.d/rc.local during boot **
reboot**(8) — Power off, reboot, or halt the machine **
repart.d**(5) — Partition Definition Files for Automatic Boot−Time Repartitioning **
resolvconf**(1) — Resolve domain names, IPV4 and IPv6 addresses, DNS resource records, and services; introspect and reconfigure the DNS resolver **
resolvectl**(1) — Resolve domain names, IPV4 and IPv6 addresses, DNS resource records, and services; introspect and reconfigure the DNS resolver **
resolved.conf**(5) — Network Name Resolution configuration files **
resolved.conf.d**(5) — Network Name Resolution configuration files **
run0**(1) — Elevate privileges **
runlevel**(8) — Print previous and current SysV runlevel

S

sd-boot(7) — A simple UEFI boot manager **
sd-bus**(3) — A lightweight D−Bus IPC client library **
sd-bus-errors**(3) — Standard D−Bus error names **
sd-daemon**(3) — APIs for new−style daemons **
sd-device**(3) — API for enumerating and introspecting local devices **
sd-event**(3) — A generic event loop implementation **
sd-hwdb**(3) — Read−only access to the hardware description database **
sd-id128**(3) — APIs for processing 128−bit IDs **
sd-journal**(3) — APIs for submitting and querying log entries to and from the journal **
sd-json**(3) — APIs for Dealing with JSON Objects **
sd-login**(3) — APIs for tracking logins **
sd-stub**(7) — A simple UEFI kernel boot stub **
sd-varlink**(3) — APIs for Varlink IPC **
SD_ALERT**(3) — APIs for new−style daemons **
sd_booted**(3) — Test whether the system is running the systemd init system **
sd_bus_add_fallback**(3) — Declare properties and methods for a D−Bus path **
sd_bus_add_fallback_vtable**(3) — Declare properties and methods for a D−Bus path **
sd_bus_add_filter**(3) — Declare properties and methods for a D−Bus path **
sd_bus_add_match**(3) — Add a match rule for incoming message dispatching **
sd_bus_add_match_async**(3) — Add a match rule for incoming message dispatching **
sd_bus_add_node_enumerator**(3) — Add a node enumerator for a D−Bus object path prefix **
sd_bus_add_object**(3) — Declare properties and methods for a D−Bus path **
sd_bus_add_object_manager**(3) — Add a D−Bus object manager for a D−Bus object sub−tree **
sd_bus_add_object_vtable**(3) — Declare properties and methods for a D−Bus path **
sd_bus_attach_event**(3) — Attach a bus connection object to an event loop **
sd_bus_call**(3) — Invoke a D−Bus method call **
sd_bus_call_async**(3) — Invoke a D−Bus method call **
sd_bus_call_method**(3) — Initialize a bus message object and invoke the corresponding D−Bus method call **
sd_bus_call_method_async**(3) — Initialize a bus message object and invoke the corresponding D−Bus method call **
sd_bus_call_method_asyncv**(3) — Initialize a bus message object and invoke the corresponding D−Bus method call **
sd_bus_call_methodv**(3) — Initialize a bus message object and invoke the corresponding D−Bus method call **
sd_bus_can_send**(3) — Check which types can be sent over a bus object **
sd_bus_close**(3) — Close and flush a bus connection **
sd_bus_close_unref**(3) — Create a new bus object and create or destroy references to it **
sd_bus_close_unrefp**(3) — Create a new bus object and create or destroy references to it **
sd_bus_creds_get_audit_login_uid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_audit_session_id**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_augmented_mask**(3) — Retrieve credentials object for the specified PID **
sd_bus_creds_get_cgroup**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_cmdline**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_comm**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_description**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_egid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_euid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_exe**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_fsgid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_fsuid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_gid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_mask**(3) — Retrieve credentials object for the specified PID **
sd_bus_creds_get_owner_uid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_pid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_pidfd_dup**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_ppid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_selinux_context**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_session**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_sgid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_slice**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_suid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_supplementary_gids**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_tid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_tid_comm**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_tty**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_uid**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_unique_name**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_unit**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_user_slice**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_user_unit**(3) — Retrieve fields from a credentials object **
sd_bus_creds_get_well_known_names**(3) — Retrieve fields from a credentials object **
sd_bus_creds_has_bounding_cap**(3) — Retrieve fields from a credentials object **
sd_bus_creds_has_effective_cap**(3) — Retrieve fields from a credentials object **
sd_bus_creds_has_inheritable_cap**(3) — Retrieve fields from a credentials object **
sd_bus_creds_has_permitted_cap**(3) — Retrieve fields from a credentials object **
sd_bus_creds_new_from_pid**(3) — Retrieve credentials object for the specified PID **
sd_bus_creds_new_from_pidfd**(3) — Retrieve credentials object for the specified PID **
sd_bus_creds_ref**(3) — Retrieve credentials object for the specified PID **
sd_bus_creds_unref**(3) — Retrieve credentials object for the specified PID **
sd_bus_creds_unrefp**(3) — Retrieve credentials object for the specified PID **
sd_bus_default**(3) — Acquire a connection to a system or user bus **
sd_bus_default_flush_close**(3) — Close and flush a bus connection **
sd_bus_default_system**(3) — Acquire a connection to a system or user bus **
sd_bus_default_user**(3) — Acquire a connection to a system or user bus **
sd_bus_destroy_t**(3) — Define the callback function for resource cleanup **
sd_bus_detach_event**(3) — Attach a bus connection object to an event loop **
sd_bus_emit_interfaces_added**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_interfaces_added_strv**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_interfaces_removed**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_interfaces_removed_strv**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_object_added**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_object_removed**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_properties_changed**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_properties_changed_strv**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_signal**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_signal_to**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_signal_tov**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_emit_signalv**(3) — Convenience functions for emitting (standard) D−Bus signals **
sd_bus_enqueue_for_read**(3) — Re−enqueue a bus message on a bus connection, for reading **
sd_bus_error**(3) — sd−bus error handling **
SD_BUS_ERROR_ACCESS_DENIED**(3) — Standard D−Bus error names **
sd_bus_error_add_map**(3) — Additional sd−dbus error mappings **
SD_BUS_ERROR_ADDRESS_IN_USE**(3) — Standard D−Bus error names **
SD_BUS_ERROR_AUTH_FAILED**(3) — Standard D−Bus error names **
SD_BUS_ERROR_BAD_ADDRESS**(3) — Standard D−Bus error names **
sd_bus_error_copy**(3) — sd−bus error handling **
SD_BUS_ERROR_DISCONNECTED**(3) — Standard D−Bus error names **
SD_BUS_ERROR_END**(3) — Additional sd−dbus error mappings **
SD_BUS_ERROR_FAILED**(3) — Standard D−Bus error names **
SD_BUS_ERROR_FILE_EXISTS**(3) — Standard D−Bus error names **
SD_BUS_ERROR_FILE_NOT_FOUND**(3) — Standard D−Bus error names **
sd_bus_error_free**(3) — sd−bus error handling **
sd_bus_error_get_errno**(3) — sd−bus error handling **
sd_bus_error_has_name**(3) — sd−bus error handling **
sd_bus_error_has_names**(3) — sd−bus error handling **
sd_bus_error_has_names_sentinel**(3) — sd−bus error handling **
SD_BUS_ERROR_INCONSISTENT_MESSAGE**(3) — Standard D−Bus error names **
SD_BUS_ERROR_INTERACTIVE_AUTHORIZATION_REQUIRED**(3) — Standard D−Bus error names **
SD_BUS_ERROR_INVALID_ARGS**(3) — Standard D−Bus error names **
SD_BUS_ERROR_INVALID_FILE_CONTENT**(3) — Standard D−Bus error names **
SD_BUS_ERROR_INVALID_SIGNATURE**(3) — Standard D−Bus error names **
SD_BUS_ERROR_IO_ERROR**(3) — Standard D−Bus error names **
sd_bus_error_is_set**(3) — sd−bus error handling **
SD_BUS_ERROR_LIMITS_EXCEEDED**(3) — Standard D−Bus error names **
SD_BUS_ERROR_MAKE_CONST**(3) — sd−bus error handling **
sd_bus_error_map**(3) — Additional sd−dbus error mappings **
SD_BUS_ERROR_MAP**(3) — Additional sd−dbus error mappings **
SD_BUS_ERROR_MATCH_RULE_INVALID**(3) — Standard D−Bus error names **
SD_BUS_ERROR_MATCH_RULE_NOT_FOUND**(3) — Standard D−Bus error names **
sd_bus_error_move**(3) — sd−bus error handling **
SD_BUS_ERROR_NAME_HAS_NO_OWNER**(3) — Standard D−Bus error names **
SD_BUS_ERROR_NO_MEMORY**(3) — Standard D−Bus error names **
SD_BUS_ERROR_NO_NETWORK**(3) — Standard D−Bus error names **
SD_BUS_ERROR_NO_REPLY**(3) — Standard D−Bus error names **
SD_BUS_ERROR_NO_SERVER**(3) — Standard D−Bus error names **
SD_BUS_ERROR_NOT_SUPPORTED**(3) — Standard D−Bus error names **
SD_BUS_ERROR_NULL**(3) — sd−bus error handling **
SD_BUS_ERROR_OBJECT_PATH_IN_USE**(3) — Standard D−Bus error names **
SD_BUS_ERROR_PROPERTY_READ_ONLY**(3) — Standard D−Bus error names **
SD_BUS_ERROR_SELINUX_SECURITY_CONTEXT_UNKNOWN**(3) — Standard D−Bus error names **
SD_BUS_ERROR_SERVICE_UNKNOWN**(3) — Standard D−Bus error names **
sd_bus_error_set**(3) — sd−bus error handling **
sd_bus_error_set_const**(3) — sd−bus error handling **
sd_bus_error_set_errno**(3) — sd−bus error handling **
sd_bus_error_set_errnof**(3) — sd−bus error handling **
sd_bus_error_set_errnofv**(3) — sd−bus error handling **
sd_bus_error_setf**(3) — sd−bus error handling **
sd_bus_error_setfv**(3) — sd−bus error handling **
SD_BUS_ERROR_TIMED_OUT**(3) — Standard D−Bus error names **
SD_BUS_ERROR_TIMEOUT**(3) — Standard D−Bus error names **
SD_BUS_ERROR_UNIX_PROCESS_ID_UNKNOWN**(3) — Standard D−Bus error names **
SD_BUS_ERROR_UNKNOWN_INTERFACE**(3) — Standard D−Bus error names **
SD_BUS_ERROR_UNKNOWN_METHOD**(3) — Standard D−Bus error names **
SD_BUS_ERROR_UNKNOWN_OBJECT**(3) — Standard D−Bus error names **
SD_BUS_ERROR_UNKNOWN_PROPERTY**(3) — Standard D−Bus error names **
sd_bus_flush**(3) — Close and flush a bus connection **
sd_bus_flush_close_unref**(3) — Create a new bus object and create or destroy references to it **
sd_bus_flush_close_unrefp**(3) — Create a new bus object and create or destroy references to it **
sd_bus_get_address**(3) — Set or query the address of the bus connection **
sd_bus_get_allow_interactive_authorization**(3) — Set or query properties of a bus object **
sd_bus_get_bus_id**(3) — Configure connection mode for a bus object **
sd_bus_get_close_on_exit**(3) — Control whether to close the bus connection during the event loop exit phase **
sd_bus_get_connected_signal**(3) — Control emission of local connection establishment signal on bus connections **
sd_bus_get_creds_mask**(3) — Control feature negotiation on bus connections **
sd_bus_get_current_handler**(3) — Query information of the callback a bus object is currently running **
sd_bus_get_current_message**(3) — Query information of the callback a bus object is currently running **
sd_bus_get_current_slot**(3) — Query information of the callback a bus object is currently running **
sd_bus_get_current_userdata**(3) — Query information of the callback a bus object is currently running **
sd_bus_get_description**(3) — Set or query properties of a bus object **
sd_bus_get_event**(3) — Attach a bus connection object to an event loop **
sd_bus_get_events**(3) — Get the file descriptor, I/O events and timeout to wait for from a message bus object **
sd_bus_get_exit_on_disconnect**(3) — Control the exit behavior when the bus object disconnects **
sd_bus_get_fd**(3) — Get the file descriptor, I/O events and timeout to wait for from a message bus object **
sd_bus_get_method_call_timeout**(3) — Set or query the default D−Bus method call timeout of a bus object **
sd_bus_get_n_queued_read**(3) — Get the number of pending bus messages in the read and write queues of a bus connection object **
sd_bus_get_n_queued_write**(3) — Get the number of pending bus messages in the read and write queues of a bus connection object **
sd_bus_get_name_creds**(3) — Query bus client credentials **
sd_bus_get_name_machine_id**(3) — Retrieve a bus client’s machine identity **
sd_bus_get_owner_creds**(3) — Query bus client credentials **
sd_bus_get_property**(3) — Set or query D−Bus service properties **
sd_bus_get_property_string**(3) — Set or query D−Bus service properties **
sd_bus_get_property_strv**(3) — Set or query D−Bus service properties **
sd_bus_get_property_trivial**(3) — Set or query D−Bus service properties **
sd_bus_get_scope**(3) — Set or query properties of a bus object **
sd_bus_get_sender**(3) — Configure default sender for outgoing messages **
sd_bus_get_tid**(3) — Set or query properties of a bus object **
sd_bus_get_timeout**(3) — Get the file descriptor, I/O events and timeout to wait for from a message bus object **
sd_bus_get_unique_name**(3) — Set or query properties of a bus object **
sd_bus_get_watch_bind**(3) — Control socket binding watching on bus connections **
sd_bus_interface_name_is_valid**(3) — Check if a string is a valid bus name or object path **
sd_bus_is_anonymous**(3) — Set or query properties of a bus object **
sd_bus_is_bus_client**(3) — Configure connection mode for a bus object **
sd_bus_is_monitor**(3) — Configure connection mode for a bus object **
sd_bus_is_open**(3) — Check whether the bus connection is open or ready **
sd_bus_is_ready**(3) — Check whether the bus connection is open or ready **
sd_bus_is_server**(3) — Configure connection mode for a bus object **
sd_bus_is_trusted**(3) — Set or query properties of a bus object **
sd_bus_list_names**(3) — Retrieve information about registered names on a bus **
sd_bus_match_signal**(3) — Add a match rule for incoming message dispatching **
sd_bus_match_signal_async**(3) — Add a match rule for incoming message dispatching **
sd_bus_member_name_is_valid**(3) — Check if a string is a valid bus name or object path **
sd_bus_message_append**(3) — Attach fields to a D−Bus message based on a type string **
sd_bus_message_append_array**(3) — Append an array of fields to a D−Bus message **
sd_bus_message_append_array_iovec**(3) — Append an array of fields to a D−Bus message **
sd_bus_message_append_array_memfd**(3) — Append an array of fields to a D−Bus message **
sd_bus_message_append_array_space**(3) — Append an array of fields to a D−Bus message **
sd_bus_message_append_basic**(3) — Attach a single field to a message **
sd_bus_message_append_string_iovec**(3) — Attach a string to a message **
sd_bus_message_append_string_memfd**(3) — Attach a string to a message **
sd_bus_message_append_string_space**(3) — Attach a string to a message **
sd_bus_message_append_strv**(3) — Attach an array of strings to a message **
sd_bus_message_appendv**(3) — Attach fields to a D−Bus message based on a type string **
sd_bus_message_at_end**(3) — Check if a message has been fully read **
sd_bus_message_close_container**(3) — Create and move between containers in D−Bus messages **
sd_bus_message_copy**(3) — Copy the contents of one message to another **
sd_bus_message_dump**(3) — Produce a string representation of a message for debugging purposes **
sd_bus_message_enter_container**(3) — Create and move between containers in D−Bus messages **
sd_bus_message_exit_container**(3) — Create and move between containers in D−Bus messages **
sd_bus_message_get_allow_interactive_authorization**(3) — Set and query bus message metadata **
sd_bus_message_get_auto_start**(3) — Set and query bus message metadata **
sd_bus_message_get_bus**(3) — Create a new bus message object and create or destroy references to it **
sd_bus_message_get_cookie**(3) — Returns the transaction cookie of a message **
sd_bus_message_get_creds**(3) — Query bus message addressing/credentials metadata **
sd_bus_message_get_destination**(3) — Set and query bus message addressing information **
sd_bus_message_get_errno**(3) — Query bus message addressing/credentials metadata **
sd_bus_message_get_error**(3) — Query bus message addressing/credentials metadata **
sd_bus_message_get_expect_reply**(3) — Set and query bus message metadata **
sd_bus_message_get_interface**(3) — Set and query bus message addressing information **
sd_bus_message_get_member**(3) — Set and query bus message addressing information **
sd_bus_message_get_monotonic_usec**(3) — Retrieve the sender timestamps and sequence number of a message **
sd_bus_message_get_path**(3) — Set and query bus message addressing information **
sd_bus_message_get_realtime_usec**(3) — Retrieve the sender timestamps and sequence number of a message **
sd_bus_message_get_reply_cookie**(3) — Returns the transaction cookie of a message **
sd_bus_message_get_sender**(3) — Set and query bus message addressing information **
sd_bus_message_get_seqnum**(3) — Retrieve the sender timestamps and sequence number of a message **
sd_bus_message_get_signature**(3) — Query bus message signature **
sd_bus_message_get_type**(3) — Query bus message addressing/credentials metadata **
sd_bus_message_has_signature**(3) — Query bus message signature **
sd_bus_message_is_empty**(3) — Query bus message signature **
sd_bus_message_is_method_call**(3) — Query bus message addressing/credentials metadata **
sd_bus_message_is_method_error**(3) — Query bus message addressing/credentials metadata **
sd_bus_message_is_signal**(3) — Query bus message addressing/credentials metadata **
SD_BUS_MESSAGE_METHOD_CALL**(3) — Create a new bus message object and create or destroy references to it **
SD_BUS_MESSAGE_METHOD_ERROR**(3) — Create a new bus message object and create or destroy references to it **
SD_BUS_MESSAGE_METHOD_RETURN**(3) — Create a new bus message object and create or destroy references to it **
sd_bus_message_new**(3) — Create a new bus message object and create or destroy references to it **
sd_bus_message_new_method_call**(3) — Create a method call message **
sd_bus_message_new_method_errno**(3) — Create an error reply for a method call **
sd_bus_message_new_method_errnof**(3) — Create an error reply for a method call **
sd_bus_message_new_method_error**(3) — Create an error reply for a method call **
sd_bus_message_new_method_errorf**(3) — Create an error reply for a method call **
sd_bus_message_new_method_return**(3) — Create a method call message **
sd_bus_message_new_signal**(3) — Create a signal message **
sd_bus_message_new_signal_to**(3) — Create a signal message **
sd_bus_message_open_container**(3) — Create and move between containers in D−Bus messages **
sd_bus_message_peek_type**(3) — Read a sequence of values from a message **
sd_bus_message_read**(3) — Read a sequence of values from a message **
sd_bus_message_read_array**(3) — Access an array of elements in a message **
sd_bus_message_read_basic**(3) — Read a basic type from a message **
sd_bus_message_read_strv**(3) — Access an array of strings in a message **
sd_bus_message_read_strv_extend**(3) — Access an array of strings in a message **
sd_bus_message_readv**(3) — Read a sequence of values from a message **
sd_bus_message_ref**(3) — Create a new bus message object and create or destroy references to it **
sd_bus_message_rewind**(3) — Return to beginning of message or current container **
sd_bus_message_seal**(3) — Prepare a D−Bus message for transmission **
sd_bus_message_send**(3) — Queue a D−Bus message for transfer **
sd_bus_message_sensitive**(3) — Mark a message object as containing sensitive data **
sd_bus_message_set_allow_interactive_authorization**(3) — Set and query bus message metadata **
sd_bus_message_set_auto_start**(3) — Set and query bus message metadata **
sd_bus_message_set_destination**(3) — Set and query bus message addressing information **
sd_bus_message_set_expect_reply**(3) — Set and query bus message metadata **
sd_bus_message_set_sender**(3) — Set and query bus message addressing information **
SD_BUS_MESSAGE_SIGNAL**(3) — Create a new bus message object and create or destroy references to it **
sd_bus_message_skip**(3) — Skip elements in a bus message **
sd_bus_message_unref**(3) — Create a new bus message object and create or destroy references to it **
sd_bus_message_unrefp**(3) — Create a new bus message object and create or destroy references to it **
sd_bus_message_verify_type**(3) — Check if the message has specified type at the current location **
SD_BUS_METHOD**(3) — Declare properties and methods for a D−Bus path **
SD_BUS_METHOD_WITH_NAMES**(3) — Declare properties and methods for a D−Bus path **
SD_BUS_METHOD_WITH_NAMES_OFFSET**(3) — Declare properties and methods for a D−Bus path **
SD_BUS_METHOD_WITH_OFFSET**(3) — Declare properties and methods for a D−Bus path **
sd_bus_negotiate_creds**(3) — Control feature negotiation on bus connections **
sd_bus_negotiate_fds**(3) — Control feature negotiation on bus connections **
sd_bus_negotiate_timestamp**(3) — Control feature negotiation on bus connections **
sd_bus_new**(3) — Create a new bus object and create or destroy references to it **
sd_bus_object_path_is_valid**(3) — Check if a string is a valid bus name or object path **
sd_bus_open**(3) — Acquire a connection to a system or user bus **
sd_bus_open_system**(3) — Acquire a connection to a system or user bus **
sd_bus_open_system_machine**(3) — Acquire a connection to a system or user bus **
sd_bus_open_system_remote**(3) — Acquire a connection to a system or user bus **
sd_bus_open_system_with_description**(3) — Acquire a connection to a system or user bus **
sd_bus_open_user**(3) — Acquire a connection to a system or user bus **
sd_bus_open_user_machine**(3) — Acquire a connection to a system or user bus **
sd_bus_open_user_with_description**(3) — Acquire a connection to a system or user bus **
sd_bus_open_with_description**(3) — Acquire a connection to a system or user bus **
SD_BUS_PARAM**(3) — Declare properties and methods for a D−Bus path **
sd_bus_path_decode**(3) — Convert an external identifier into an object path and back **
sd_bus_path_decode_many**(3) — Convert an external identifier into an object path and back **
sd_bus_path_encode**(3) — Convert an external identifier into an object path and back **
sd_bus_path_encode_many**(3) — Convert an external identifier into an object path and back **
sd_bus_pending_method_calls**(3) — Return the number of currently pending, outgoing method calls **
sd_bus_process**(3) — Drive the connection **
SD_BUS_PROPERTY**(3) — Declare properties and methods for a D−Bus path **
sd_bus_query_sender_creds**(3) — Query bus message sender credentials/privileges **
sd_bus_query_sender_privilege**(3) — Query bus message sender credentials/privileges **
sd_bus_ref**(3) — Create a new bus object and create or destroy references to it **
sd_bus_release_name**(3) — Request or release a well−known service name on a bus **
sd_bus_release_name_async**(3) — Request or release a well−known service name on a bus **
sd_bus_reply_method_errno**(3) — Reply with an error to a D−Bus method call **
sd_bus_reply_method_errnof**(3) — Reply with an error to a D−Bus method call **
sd_bus_reply_method_errnofv**(3) — Reply with an error to a D−Bus method call **
sd_bus_reply_method_error**(3) — Reply with an error to a D−Bus method call **
sd_bus_reply_method_errorf**(3) — Reply with an error to a D−Bus method call **
sd_bus_reply_method_errorfv**(3) — Reply with an error to a D−Bus method call **
sd_bus_reply_method_return**(3) — Reply to a D−Bus method call **
sd_bus_reply_method_returnv**(3) — Reply to a D−Bus method call **
sd_bus_request_name**(3) — Request or release a well−known service name on a bus **
sd_bus_request_name_async**(3) — Request or release a well−known service name on a bus **
sd_bus_send**(3) — Queue a D−Bus message for transfer **
sd_bus_send_to**(3) — Queue a D−Bus message for transfer **
sd_bus_service_name_is_valid**(3) — Check if a string is a valid bus name or object path **
sd_bus_set_address**(3) — Set or query the address of the bus connection **
sd_bus_set_allow_interactive_authorization**(3) — Set or query properties of a bus object **
sd_bus_set_anonymous**(3) — Set or query properties of a bus object **
sd_bus_set_bus_client**(3) — Configure connection mode for a bus object **
sd_bus_set_close_on_exit**(3) — Control whether to close the bus connection during the event loop exit phase **
sd_bus_set_connected_signal**(3) — Control emission of local connection establishment signal on bus connections **
sd_bus_set_description**(3) — Set or query properties of a bus object **
sd_bus_set_exec**(3) — Set or query the address of the bus connection **
sd_bus_set_exit_on_disconnect**(3) — Control the exit behavior when the bus object disconnects **
sd_bus_set_fd**(3) — Set the file descriptors to use for bus communication **
sd_bus_set_method_call_timeout**(3) — Set or query the default D−Bus method call timeout of a bus object **
sd_bus_set_monitor**(3) — Configure connection mode for a bus object **
sd_bus_set_property**(3) — Set or query D−Bus service properties **
sd_bus_set_propertyv**(3) — Set or query D−Bus service properties **
sd_bus_set_sender**(3) — Configure default sender for outgoing messages **
sd_bus_set_server**(3) — Configure connection mode for a bus object **
sd_bus_set_trusted**(3) — Set or query properties of a bus object **
sd_bus_set_watch_bind**(3) — Control socket binding watching on bus connections **
SD_BUS_SIGNAL**(3) — Declare properties and methods for a D−Bus path **
SD_BUS_SIGNAL_WITH_NAMES**(3) — Declare properties and methods for a D−Bus path **
sd_bus_slot_get_bus**(3) — Query information attached to a bus slot object **
sd_bus_slot_get_current_handler**(3) — Query information attached to a bus slot object **
sd_bus_slot_get_current_message**(3) — Query information attached to a bus slot object **
sd_bus_slot_get_current_userdata**(3) — Query information attached to a bus slot object **
sd_bus_slot_get_description**(3) — Set or query the description of bus slot objects **
sd_bus_slot_get_destroy_callback**(3) — Define the callback function for resource cleanup **
sd_bus_slot_get_floating**(3) — Control whether a bus slot object is “floating” **
sd_bus_slot_get_userdata**(3) — Set and query the value in the “userdata” field **
sd_bus_slot_ref**(3) — Create and destroy references to a bus slot object **
sd_bus_slot_set_description**(3) — Set or query the description of bus slot objects **
sd_bus_slot_set_destroy_callback**(3) — Define the callback function for resource cleanup **
sd_bus_slot_set_floating**(3) — Control whether a bus slot object is “floating” **
sd_bus_slot_set_userdata**(3) — Set and query the value in the “userdata” field **
sd_bus_slot_unref**(3) — Create and destroy references to a bus slot object **
sd_bus_slot_unrefp**(3) — Create and destroy references to a bus slot object **
sd_bus_start**(3) — Initiate a bus connection to the D−bus broker daemon **
sd_bus_track_add_name**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_add_sender**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_contains**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_count**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_count_name**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_count_sender**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_first**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_get_bus**(3) — Track bus peers **
sd_bus_track_get_destroy_callback**(3) — Define the callback function for resource cleanup **
sd_bus_track_get_recursive**(3) — Track bus peers **
sd_bus_track_get_userdata**(3) — Track bus peers **
sd_bus_track_new**(3) — Track bus peers **
sd_bus_track_next**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_ref**(3) — Track bus peers **
sd_bus_track_remove_name**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_remove_sender**(3) — Add, remove and retrieve bus peers tracked in a bus peer tracking object **
sd_bus_track_set_destroy_callback**(3) — Define the callback function for resource cleanup **
sd_bus_track_set_recursive**(3) — Track bus peers **
sd_bus_track_set_userdata**(3) — Track bus peers **
sd_bus_track_unref**(3) — Track bus peers **
sd_bus_track_unrefp**(3) — Track bus peers **
sd_bus_unref**(3) — Create a new bus object and create or destroy references to it **
sd_bus_unrefp**(3) — Create a new bus object and create or destroy references to it **
SD_BUS_VTABLE_CAPABILITY**(3) — Declare properties and methods for a D−Bus path **
SD_BUS_VTABLE_END**(3) — Declare properties and methods for a D−Bus path **
SD_BUS_VTABLE_START**(3) — Declare properties and methods for a D−Bus path **
sd_bus_wait**(3) — Wait for I/O on a bus connection **
SD_BUS_WRITABLE_PROPERTY**(3) — Declare properties and methods for a D−Bus path **
SD_CRIT**(3) — APIs for new−style daemons **
SD_DEBUG**(3) — APIs for new−style daemons **
sd_device_get_device_id**(3) — Returns various fields of device objects **
sd_device_get_devname**(3) — Returns various fields of device objects **
sd_device_get_devnum**(3) — Returns various fields of device objects **
sd_device_get_devpath**(3) — Returns various fields of device objects **
sd_device_get_devtype**(3) — Returns various fields of device objects **
sd_device_get_diskseq**(3) — Returns various fields of device objects **
sd_device_get_driver**(3) — Returns various fields of device objects **
sd_device_get_driver_subsystem**(3) — Returns various fields of device objects **
sd_device_get_ifindex**(3) — Returns various fields of device objects **
sd_device_get_subsystem**(3) — Returns various fields of device objects **
sd_device_get_sysname**(3) — Returns various fields of device objects **
sd_device_get_sysnum**(3) — Returns various fields of device objects **
sd_device_get_syspath**(3) — Returns various fields of device objects **
sd_device_ref**(3) — Create or destroy references to a device object **
sd_device_unref**(3) — Create or destroy references to a device object **
sd_device_unrefp**(3) — Create or destroy references to a device object **
SD_EMERG**(3) — APIs for new−style daemons **
SD_ERR**(3) — APIs for new−style daemons **
sd_event**(3) — Acquire and release an event loop object **
sd_event_add_child**(3) — Add a child process state change event source to an event loop **
sd_event_add_child_pidfd**(3) — Add a child process state change event source to an event loop **
sd_event_add_defer**(3) — Add static event sources to an event loop **
sd_event_add_exit**(3) — Add static event sources to an event loop **
sd_event_add_inotify**(3) — Add an “inotify” file system inode event source to an event loop **
sd_event_add_inotify_fd**(3) — Add an “inotify” file system inode event source to an event loop **
sd_event_add_io**(3) — Add an I/O event source to an event loop **
sd_event_add_memory_pressure**(3) — Add and configure an event source run as result of memory pressure **
sd_event_add_post**(3) — Add static event sources to an event loop **
sd_event_add_signal**(3) — Add a UNIX process signal event source to an event loop **
sd_event_add_time**(3) — Add a timer event source to an event loop **
sd_event_add_time_relative**(3) — Add a timer event source to an event loop **
SD_EVENT_ARMED**(3) — Low−level event loop operations **
sd_event_child_handler_t**(3) — Add a child process state change event source to an event loop **
sd_event_default**(3) — Acquire and release an event loop object **
sd_event_destroy_t**(3) — Define the callback function for resource cleanup **
sd_event_dispatch**(3) — Low−level event loop operations **
sd_event_exit**(3) — Ask the event loop to exit **
SD_EVENT_EXITING**(3) — Low−level event loop operations **
SD_EVENT_FINISHED**(3) — Low−level event loop operations **
sd_event_get_exit_code**(3) — Ask the event loop to exit **
sd_event_get_fd**(3) — Obtain a file descriptor to poll for event loop events **
sd_event_get_iteration**(3) — Low−level event loop operations **
sd_event_get_state**(3) — Low−level event loop operations **
sd_event_get_tid**(3) — Acquire and release an event loop object **
sd_event_get_watchdog**(3) — Enable event loop watchdog support **
sd_event_handler_t**(3) — Add static event sources to an event loop **
SD_EVENT_INITIAL**(3) — Low−level event loop operations **
sd_event_inotify_handler_t**(3) — Add an “inotify” file system inode event source to an event loop **
sd_event_io_handler_t**(3) — Add an I/O event source to an event loop **
sd_event_loop**(3) — Run an event loop **
sd_event_new**(3) — Acquire and release an event loop object **
sd_event_now**(3) — Retrieve current event loop iteration timestamp **
SD_EVENT_OFF**(3) — Enable or disable event sources **
SD_EVENT_ON**(3) — Enable or disable event sources **
SD_EVENT_ONESHOT**(3) — Enable or disable event sources **
SD_EVENT_PENDING**(3) — Low−level event loop operations **
sd_event_prepare**(3) — Low−level event loop operations **
SD_EVENT_PREPARING**(3) — Low−level event loop operations **
SD_EVENT_PRIORITY_IDLE**(3) — Set or retrieve the priority of event sources **
SD_EVENT_PRIORITY_IMPORTANT**(3) — Set or retrieve the priority of event sources **
SD_EVENT_PRIORITY_NORMAL**(3) — Set or retrieve the priority of event sources **
sd_event_ref**(3) — Acquire and release an event loop object **
sd_event_run**(3) — Run an event loop **
SD_EVENT_RUNNING**(3) — Low−level event loop operations **
sd_event_set_signal_exit**(3) — Automatically leave event loop on SIGINT and SIGTERM **
sd_event_set_watchdog**(3) — Enable event loop watchdog support **
sd_event_signal_handler_t**(3) — Add a UNIX process signal event source to an event loop **
SD_EVENT_SIGNAL_PROCMASK**(3) — Add a UNIX process signal event source to an event loop **
sd_event_source**(3) — Add an I/O event source to an event loop **
sd_event_source_disable_unref**(3) — Increase or decrease event source reference counters **
sd_event_source_disable_unrefp**(3) — Increase or decrease event source reference counters **
sd_event_source_get_child_pid**(3) — Add a child process state change event source to an event loop **
sd_event_source_get_child_pidfd**(3) — Add a child process state change event source to an event loop **
sd_event_source_get_child_pidfd_own**(3) — Add a child process state change event source to an event loop **
sd_event_source_get_child_process_own**(3) — Add a child process state change event source to an event loop **
sd_event_source_get_description**(3) — Set or retrieve descriptive names of event sources **
sd_event_source_get_destroy_callback**(3) — Define the callback function for resource cleanup **
sd_event_source_get_enabled**(3) — Enable or disable event sources **
sd_event_source_get_event**(3) — Retrieve the event loop of an event source **
sd_event_source_get_exit_on_failure**(3) — Set or retrieve the exit−on−failure feature of event sources **
sd_event_source_get_floating**(3) — Set or retrieve ‘floating’ state of event sources **
sd_event_source_get_inotify_mask**(3) — Add an “inotify” file system inode event source to an event loop **
sd_event_source_get_inotify_path**(3) — Add an “inotify” file system inode event source to an event loop **
sd_event_source_get_io_events**(3) — Add an I/O event source to an event loop **
sd_event_source_get_io_fd**(3) — Add an I/O event source to an event loop **
sd_event_source_get_io_fd_own**(3) — Add an I/O event source to an event loop **
sd_event_source_get_io_revents**(3) — Add an I/O event source to an event loop **
sd_event_source_get_pending**(3) — Determine pending state of event sources **
sd_event_source_get_priority**(3) — Set or retrieve the priority of event sources **
sd_event_source_get_ratelimit**(3) — Configure rate limiting on event sources **
sd_event_source_get_signal**(3) — Add a UNIX process signal event source to an event loop **
sd_event_source_get_time**(3) — Add a timer event source to an event loop **
sd_event_source_get_time_accuracy**(3) — Add a timer event source to an event loop **
sd_event_source_get_time_clock**(3) — Add a timer event source to an event loop **
sd_event_source_get_userdata**(3) — Set or retrieve user data pointer of event sources **
sd_event_source_is_ratelimited**(3) — Configure rate limiting on event sources **
sd_event_source_leave_ratelimit**(3) — Configure rate limiting on event sources **
sd_event_source_ref**(3) — Increase or decrease event source reference counters **
sd_event_source_send_child_signal**(3) — Add a child process state change event source to an event loop **
sd_event_source_set_child_pidfd_own**(3) — Add a child process state change event source to an event loop **
sd_event_source_set_child_process_own**(3) — Add a child process state change event source to an event loop **
sd_event_source_set_description**(3) — Set or retrieve descriptive names of event sources **
sd_event_source_set_destroy_callback**(3) — Define the callback function for resource cleanup **
sd_event_source_set_enabled**(3) — Enable or disable event sources **
sd_event_source_set_exit_on_failure**(3) — Set or retrieve the exit−on−failure feature of event sources **
sd_event_source_set_floating**(3) — Set or retrieve ‘floating’ state of event sources **
sd_event_source_set_io_events**(3) — Add an I/O event source to an event loop **
sd_event_source_set_io_fd**(3) — Add an I/O event source to an event loop **
sd_event_source_set_io_fd_own**(3) — Add an I/O event source to an event loop **
sd_event_source_set_memory_pressure_period**(3) — Add and configure an event source run as result of memory pressure **
sd_event_source_set_memory_pressure_type**(3) — Add and configure an event source run as result of memory pressure **
sd_event_source_set_prepare**(3) — Set a preparation callback for event sources **
sd_event_source_set_priority**(3) — Set or retrieve the priority of event sources **
sd_event_source_set_ratelimit**(3) — Configure rate limiting on event sources **
sd_event_source_set_ratelimit_expire_callback**(3) — Configure rate limiting on event sources **
sd_event_source_set_time**(3) — Add a timer event source to an event loop **
sd_event_source_set_time_accuracy**(3) — Add a timer event source to an event loop **
sd_event_source_set_time_relative**(3) — Add a timer event source to an event loop **
sd_event_source_set_userdata**(3) — Set or retrieve user data pointer of event sources **
sd_event_source_unref**(3) — Increase or decrease event source reference counters **
sd_event_source_unrefp**(3) — Increase or decrease event source reference counters **
sd_event_time_handler_t**(3) — Add a timer event source to an event loop **
sd_event_trim_memory**(3) — Add and configure an event source run as result of memory pressure **
sd_event_unref**(3) — Acquire and release an event loop object **
sd_event_unrefp**(3) — Acquire and release an event loop object **
sd_event_wait**(3) — Low−level event loop operations **
sd_get_machine_names**(3) — Determine available seats, sessions, logged in users and virtual machines/containers **
sd_get_seats**(3) — Determine available seats, sessions, logged in users and virtual machines/containers **
sd_get_sessions**(3) — Determine available seats, sessions, logged in users and virtual machines/containers **
sd_get_uids**(3) — Determine available seats, sessions, logged in users and virtual machines/containers **
sd_hwdb_enumerate**(3) — Seek to a location in hwdb or access entries **
SD_HWDB_FOREACH_PROPERTY**(3) — Seek to a location in hwdb or access entries **
sd_hwdb_get**(3) — Seek to a location in hwdb or access entries **
sd_hwdb_new**(3) — Create a new hwdb object and create or destroy references to it **
sd_hwdb_new_from_path**(3) — Create a new hwdb object and create or destroy references to it **
sd_hwdb_ref**(3) — Create a new hwdb object and create or destroy references to it **
sd_hwdb_seek**(3) — Seek to a location in hwdb or access entries **
sd_hwdb_unref**(3) — Create a new hwdb object and create or destroy references to it **
SD_ID128_ALLF**(3) — APIs for processing 128−bit IDs **
SD_ID128_CONST_STR**(3) — APIs for processing 128−bit IDs **
sd_id128_equal**(3) — APIs for processing 128−bit IDs **
SD_ID128_FORMAT_STR**(3) — APIs for processing 128−bit IDs **
SD_ID128_FORMAT_VAL**(3) — APIs for processing 128−bit IDs **
sd_id128_from_string**(3) — Format or parse 128−bit IDs as strings **
sd_id128_get_app_specific**(3) — Retrieve 128−bit IDs **
sd_id128_get_boot**(3) — Retrieve 128−bit IDs **
sd_id128_get_boot_app_specific**(3) — Retrieve 128−bit IDs **
sd_id128_get_invocation**(3) — Retrieve 128−bit IDs **
sd_id128_get_machine**(3) — Retrieve 128−bit IDs **
sd_id128_get_machine_app_specific**(3) — Retrieve 128−bit IDs **
sd_id128_in_set**(3) — APIs for processing 128−bit IDs **
sd_id128_in_set_sentinel**(3) — APIs for processing 128−bit IDs **
sd_id128_in_setv**(3) — APIs for processing 128−bit IDs **
sd_id128_is_allf**(3) — APIs for processing 128−bit IDs **
sd_id128_is_null**(3) — APIs for processing 128−bit IDs **
SD_ID128_MAKE**(3) — APIs for processing 128−bit IDs **
SD_ID128_MAKE_STR**(3) — APIs for processing 128−bit IDs **
SD_ID128_MAKE_UUID_STR**(3) — APIs for processing 128−bit IDs **
SD_ID128_NULL**(3) — APIs for processing 128−bit IDs **
sd_id128_randomize**(3) — Generate 128−bit IDs **
sd_id128_string_equal**(3) — APIs for processing 128−bit IDs **
SD_ID128_STRING_MAX**(3) — Format or parse 128−bit IDs as strings **
sd_id128_t**(3) — APIs for processing 128−bit IDs **
sd_id128_to_string**(3) — Format or parse 128−bit IDs as strings **
SD_ID128_TO_STRING**(3) — Format or parse 128−bit IDs as strings **
sd_id128_to_uuid_string**(3) — Format or parse 128−bit IDs as strings **
SD_ID128_TO_UUID_STRING**(3) — Format or parse 128−bit IDs as strings **
SD_ID128_UUID_FORMAT_STR**(3) — APIs for processing 128−bit IDs **
SD_ID128_UUID_STRING_MAX**(3) — Format or parse 128−bit IDs as strings **
SD_INFO**(3) — APIs for new−style daemons **
sd_is_fifo**(3) — Check the type of a file descriptor **
sd_is_mq**(3) — Check the type of a file descriptor **
sd_is_socket**(3) — Check the type of a file descriptor **
sd_is_socket_inet**(3) — Check the type of a file descriptor **
sd_is_socket_sockaddr**(3) — Check the type of a file descriptor **
sd_is_socket_unix**(3) — Check the type of a file descriptor **
sd_is_special**(3) — Check the type of a file descriptor **
sd_journal**(3) — Open the system journal for reading **
sd_journal_add_conjunction**(3) — Add or remove entry matches **
sd_journal_add_disjunction**(3) — Add or remove entry matches **
sd_journal_add_match**(3) — Add or remove entry matches **
SD_JOURNAL_ALL_NAMESPACES**(3) — Open the system journal for reading **
SD_JOURNAL_APPEND**(3) — Journal change notification interface **
sd_journal_close**(3) — Open the system journal for reading **
SD_JOURNAL_CURRENT_USER**(3) — Open the system journal for reading **
sd_journal_enumerate_available_data**(3) — Read data fields from the current journal entry **
sd_journal_enumerate_available_unique**(3) — Read unique data fields from the journal **
sd_journal_enumerate_data**(3) — Read data fields from the current journal entry **
sd_journal_enumerate_fields**(3) — Read used field names from the journal **
sd_journal_enumerate_unique**(3) — Read unique data fields from the journal **
sd_journal_flush_matches**(3) — Add or remove entry matches **
SD_JOURNAL_FOREACH**(3) — Advance or set back the read pointer in the journal **
SD_JOURNAL_FOREACH_BACKWARDS**(3) — Advance or set back the read pointer in the journal **
SD_JOURNAL_FOREACH_DATA**(3) — Read data fields from the current journal entry **
SD_JOURNAL_FOREACH_FIELD**(3) — Read used field names from the journal **
SD_JOURNAL_FOREACH_UNIQUE**(3) — Read unique data fields from the journal **
sd_journal_get_catalog**(3) — Retrieve message catalog entry **
sd_journal_get_catalog_for_message_id**(3) — Retrieve message catalog entry **
sd_journal_get_cursor**(3) — Get cursor string for or test cursor string against the current journal entry **
sd_journal_get_cutoff_monotonic_usec**(3) — Read cut−off timestamps from the current journal entry **
sd_journal_get_cutoff_realtime_usec**(3) — Read cut−off timestamps from the current journal entry **
sd_journal_get_data**(3) — Read data fields from the current journal entry **
sd_journal_get_data_threshold**(3) — Read data fields from the current journal entry **
sd_journal_get_events**(3) — Journal change notification interface **
sd_journal_get_fd**(3) — Journal change notification interface **
sd_journal_get_monotonic_usec**(3) — Read timestamps from the current journal entry **
sd_journal_get_realtime_usec**(3) — Read timestamps from the current journal entry **
sd_journal_get_seqnum**(3) — Read sequence number from the current journal entry **
sd_journal_get_timeout**(3) — Journal change notification interface **
sd_journal_get_usage**(3) — Journal disk usage **
sd_journal_has_persistent_files**(3) — Query availability of runtime or persistent journal files **
sd_journal_has_runtime_files**(3) — Query availability of runtime or persistent journal files **
SD_JOURNAL_INCLUDE_DEFAULT_NAMESPACE**(3) — Open the system journal for reading **
SD_JOURNAL_INVALIDATE**(3) — Journal change notification interface **
SD_JOURNAL_LOCAL_ONLY**(3) — Open the system journal for reading **
sd_journal_next**(3) — Advance or set back the read pointer in the journal **
sd_journal_next_skip**(3) — Advance or set back the read pointer in the journal **
SD_JOURNAL_NOP**(3) — Journal change notification interface **
sd_journal_open**(3) — Open the system journal for reading **
sd_journal_open_directory**(3) — Open the system journal for reading **
sd_journal_open_directory_fd**(3) — Open the system journal for reading **
sd_journal_open_files**(3) — Open the system journal for reading **
sd_journal_open_files_fd**(3) — Open the system journal for reading **
sd_journal_open_namespace**(3) — Open the system journal for reading **
SD_JOURNAL_OS_ROOT**(3) — Open the system journal for reading **
sd_journal_perror**(3) — Submit log entries to the journal **
sd_journal_perror_with_location**(3) — Submit log entries to the journal **
sd_journal_previous**(3) — Advance or set back the read pointer in the journal **
sd_journal_previous_skip**(3) — Advance or set back the read pointer in the journal **
sd_journal_print**(3) — Submit log entries to the journal **
sd_journal_print_with_location**(3) — Submit log entries to the journal **
sd_journal_printv**(3) — Submit log entries to the journal **
sd_journal_printv_with_location**(3) — Submit log entries to the journal **
sd_journal_process**(3) — Journal change notification interface **
sd_journal_query_unique**(3) — Read unique data fields from the journal **
sd_journal_reliable_fd**(3) — Journal change notification interface **
sd_journal_restart_data**(3) — Read data fields from the current journal entry **
sd_journal_restart_fields**(3) — Read used field names from the journal **
sd_journal_restart_unique**(3) — Read unique data fields from the journal **
SD_JOURNAL_RUNTIME_ONLY**(3) — Open the system journal for reading **
sd_journal_seek_cursor**(3) — Seek to a position in the journal **
sd_journal_seek_head**(3) — Seek to a position in the journal **
sd_journal_seek_monotonic_usec**(3) — Seek to a position in the journal **
sd_journal_seek_realtime_usec**(3) — Seek to a position in the journal **
sd_journal_seek_tail**(3) — Seek to a position in the journal **
sd_journal_send**(3) — Submit log entries to the journal **
sd_journal_send_with_location**(3) — Submit log entries to the journal **
sd_journal_sendv**(3) — Submit log entries to the journal **
sd_journal_sendv_with_location**(3) — Submit log entries to the journal **
sd_journal_set_data_threshold**(3) — Read data fields from the current journal entry **
sd_journal_step_one**(3) — Advance or set back the read pointer in the journal **
sd_journal_stream_fd**(3) — Create log stream file descriptor to the journal **
sd_journal_stream_fd_with_namespace**(3) — Create log stream file descriptor to the journal **
SD_JOURNAL_SUPPRESS_LOCATION**(3) — Submit log entries to the journal **
SD_JOURNAL_SYSTEM**(3) — Open the system journal for reading **
SD_JOURNAL_TAKE_DIRECTORY_FD**(3) — Open the system journal for reading **
sd_journal_test_cursor**(3) — Get cursor string for or test cursor string against the current journal entry **
sd_journal_wait**(3) — Journal change notification interface **
sd_listen_fds**(3) — Check for file descriptors passed by the system manager **
SD_LISTEN_FDS_START**(3) — Check for file descriptors passed by the system manager **
sd_listen_fds_with_names**(3) — Check for file descriptors passed by the system manager **
sd_login_monitor**(3) — Monitor login sessions, seats, users and virtual machines/containers **
sd_login_monitor_flush**(3) — Monitor login sessions, seats, users and virtual machines/containers **
sd_login_monitor_get_events**(3) — Monitor login sessions, seats, users and virtual machines/containers **
sd_login_monitor_get_fd**(3) — Monitor login sessions, seats, users and virtual machines/containers **
sd_login_monitor_get_timeout**(3) — Monitor login sessions, seats, users and virtual machines/containers **
sd_login_monitor_new**(3) — Monitor login sessions, seats, users and virtual machines/containers **
sd_login_monitor_unref**(3) — Monitor login sessions, seats, users and virtual machines/containers **
sd_login_monitor_unrefp**(3) — Monitor login sessions, seats, users and virtual machines/containers **
sd_machine_get_class**(3) — Determine the class and network interface indices of a locally running virtual machine or container **
sd_machine_get_ifindices**(3) — Determine the class and network interface indices of a locally running virtual machine or container **
SD_NOTICE**(3) — APIs for new−style daemons **
sd_notify**(3) — Notify service manager about start−up completion and other service status changes **
sd_notify_barrier**(3) — Notify service manager about start−up completion and other service status changes **
sd_notifyf**(3) — Notify service manager about start−up completion and other service status changes **
sd_path_lookup**(3) — Query well−known file system paths **
sd_path_lookup_strv**(3) — Query well−known file system paths **
sd_peer_get_cgroup**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_peer_get_machine_name**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_peer_get_owner_uid**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_peer_get_session**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_peer_get_slice**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_peer_get_unit**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_peer_get_user_slice**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_peer_get_user_unit**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_get_cgroup**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_get_machine_name**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_get_owner_uid**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_get_session**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_get_slice**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_get_unit**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_get_user_slice**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_get_user_unit**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pid_notify**(3) — Notify service manager about start−up completion and other service status changes **
sd_pid_notify_barrier**(3) — Notify service manager about start−up completion and other service status changes **
sd_pid_notify_with_fds**(3) — Notify service manager about start−up completion and other service status changes **
sd_pid_notifyf**(3) — Notify service manager about start−up completion and other service status changes **
sd_pid_notifyf_with_fds**(3) — Notify service manager about start−up completion and other service status changes **
sd_pidfd_get_cgroup**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pidfd_get_machine_name**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pidfd_get_owner_uid**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pidfd_get_session**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pidfd_get_slice**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pidfd_get_unit**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pidfd_get_user_slice**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_pidfd_get_user_unit**(3) — Determine the owner uid of the user unit or session, or the session, user unit, system unit, container/VM or slice that a specific PID or socket peer belongs to **
sd_seat_can_graphical**(3) — Determine state of a specific seat **
sd_seat_can_tty**(3) — Determine state of a specific seat **
sd_seat_get_active**(3) — Determine state of a specific seat **
sd_seat_get_sessions**(3) — Determine state of a specific seat **
sd_session_get_class**(3) — Determine state of a specific session **
sd_session_get_desktop**(3) — Determine state of a specific session **
sd_session_get_display**(3) — Determine state of a specific session **
sd_session_get_leader**(3) — Determine state of a specific session **
sd_session_get_remote_host**(3) — Determine state of a specific session **
sd_session_get_remote_user**(3) — Determine state of a specific session **
sd_session_get_seat**(3) — Determine state of a specific session **
sd_session_get_service**(3) — Determine state of a specific session **
sd_session_get_start_time**(3) — Determine state of a specific session **
sd_session_get_state**(3) — Determine state of a specific session **
sd_session_get_tty**(3) — Determine state of a specific session **
sd_session_get_type**(3) — Determine state of a specific session **
sd_session_get_uid**(3) — Determine state of a specific session **
sd_session_get_username**(3) — Determine state of a specific session **
sd_session_get_vt**(3) — Determine state of a specific session **
sd_session_is_active**(3) — Determine state of a specific session **
sd_session_is_remote**(3) — Determine state of a specific session **
sd_uid_get_display**(3) — Determine login state of a specific Unix user ID **
sd_uid_get_login_time**(3) — Determine login state of a specific Unix user ID **
sd_uid_get_seats**(3) — Determine login state of a specific Unix user ID **
sd_uid_get_sessions**(3) — Determine login state of a specific Unix user ID **
sd_uid_get_state**(3) — Determine login state of a specific Unix user ID **
sd_uid_is_on_seat**(3) — Determine login state of a specific Unix user ID **
SD_WARNING**(3) — APIs for new−style daemons **
sd_watchdog_enabled**(3) — Check whether the service manager expects watchdog keep−alive notifications from a service **
shutdown**(8) — Halt, power off or reboot the machine **
sleep.conf.d**(5) — Suspend and hibernation configuration file **
smbios-type-11**(7) — SMBIOS Type 11 strings **
sysctl.d**(5) — Configure kernel parameters at boot **
system.conf.d**(5) — System and session service manager configuration files **
systemctl**(1) — Control the systemd system and service manager **
systemd**(1) — systemd system and service manager **
systemd-ac-power**(1) — Report whether we are connected to an external power source **
systemd-analyze**(1) — Analyze and debug system manager **
systemd-ask-password**(1) — Query the user for a system password **
systemd-ask-password-console.path**(8) — Query the user for system passwords on the console and via wall **
systemd-ask-password-console.service**(8) — Query the user for system passwords on the console and via wall **
systemd-ask-password-wall.path**(8) — Query the user for system passwords on the console and via wall **
systemd-ask-password-wall.service**(8) — Query the user for system passwords on the console and via wall **
systemd-backlight**(8) — Load and save the display backlight brightness at boot and shutdown **
systemd-backlight@.service**(8) — Load and save the display backlight brightness at boot and shutdown **
systemd-battery-check**(8) — Check battery level whether there’s enough charge, and power off if not **
systemd-battery-check.service**(8) — Check battery level whether there’s enough charge, and power off if not **
systemd-binfmt**(8) — Configure additional binary formats for executables at boot **
systemd-binfmt.service**(8) — Configure additional binary formats for executables at boot **
systemd-bless-boot**(8) — Mark current boot process as successful **
systemd-bless-boot-generator**(8) — Pull systemd−bless−boot.service into the initial boot transaction when boot counting is in effect **
systemd-bless-boot.service**(8) — Mark current boot process as successful **
systemd-boot**(7) — A simple UEFI boot manager **
systemd-boot-check-no-failures**(8) — verify that the system booted up cleanly **
systemd-boot-check-no-failures.service**(8) — verify that the system booted up cleanly **
systemd-boot-random-seed.service**(8) — Refresh boot loader random seed at boot **
systemd-cat**(1) — Connect a pipeline or program’s output with the journal **
systemd-cgls**(1) — Recursively show control group contents **
systemd-cgtop**(1) — Show top control groups by their resource usage **
systemd-confext**(8) — Activates System Extension Images **
systemd-confext.service**(8) — Activates System Extension Images **
systemd-coredump**(8) — Acquire, save and process core dumps **
systemd-coredump.socket**(8) — Acquire, save and process core dumps **
systemd-coredump@.service**(8) — Acquire, save and process core dumps **
systemd-creds**(1) — Lists, shows, encrypts and decrypts service credentials **
systemd-cryptenroll**(1) — Enroll PKCS#11, FIDO2, TPM2 token/devices to LUKS2 encrypted volumes **
systemd-cryptsetup**(8) — Full disk decryption logic **
systemd-cryptsetup-generator**(8) — Unit generator for /etc/crypttab **
systemd-cryptsetup@.service**(8) — Full disk decryption logic **
systemd-debug-generator**(8) — Generator for enabling a runtime debug shell and masking specific units at boot **
systemd-delta**(1) — Find overridden configuration files **
systemd-detect-virt**(1) — Detect execution in a virtualized environment **
systemd-dissect**(1) — Dissect Discoverable Disk Images (DDIs) **
systemd-environment-d-generator**(8) — Load variables specified by environment.d **
systemd-escape**(1) — Escape strings for usage in systemd unit names **
systemd-firstboot**(1) — Initialize basic system settings on or before the first boot−up of a system **
systemd-firstboot.service**(1) — Initialize basic system settings on or before the first boot−up of a system **
systemd-fsck**(8) — File system checker logic **
systemd-fsck-root.service**(8) — File system checker logic **
systemd-fsck-usr.service**(8) — File system checker logic **
systemd-fsck@.service**(8) — File system checker logic **
systemd-fstab-generator**(8) — Unit generator for /etc/fstab **
systemd-getty-generator**(8) — Generator for enabling getty instances on the console **
systemd-gpt-auto-generator**(8) — Generator for automatically discovering and mounting root, /home/ , /srv/ , /var/ and /var/tmp/ partitions, as well as discovering and enabling swap partitions, based on GPT partition type GUIDs **
systemd-growfs**(8) — Creating and growing file systems on demand **
systemd-growfs-root.service**(8) — Creating and growing file systems on demand **
systemd-growfs@.service**(8) — Creating and growing file systems on demand **
systemd-halt.service**(8) — System shutdown logic **
systemd-hibernate-clear.service**(8) — Resume from hibernation **
systemd-hibernate-resume**(8) — Resume from hibernation **
systemd-hibernate-resume-generator**(8) — Unit generator for resume= kernel parameter **
systemd-hibernate-resume.service**(8) — Resume from hibernation **
systemd-hibernate.service**(8) — System sleep state logic **
systemd-hostnamed**(8) — Daemon to control system hostname from programs **
systemd-hostnamed.service**(8) — Daemon to control system hostname from programs **
systemd-hwdb**(8) — hardware database management tool **
systemd-hybrid-sleep.service**(8) — System sleep state logic **
systemd-id128**(1) — Generate and print sd−128 identifiers **
systemd-import-generator**(8) — Generator for automatically downloading disk images at boot **
systemd-importd**(8) — VM and container image import and export service **
systemd-importd.service**(8) — VM and container image import and export service **
systemd-inhibit**(1) — Execute a program with an inhibition lock taken **
systemd-initctl**(8) — /dev/initctl compatibility **
systemd-initctl.service**(8) — /dev/initctl compatibility **
systemd-initctl.socket**(8) — /dev/initctl compatibility **
systemd-integritysetup**(8) — Disk integrity protection logic **
systemd-integritysetup-generator**(8) — Unit generator for integrity protected block devices **
systemd-integritysetup@.service**(8) — Disk integrity protection logic **
systemd-journal-gatewayd**(8) — HTTP server for journal events **
systemd-journal-gatewayd.service**(8) — HTTP server for journal events **
systemd-journal-gatewayd.socket**(8) — HTTP server for journal events **
systemd-journal-remote**(8) — Receive journal messages over the network **
systemd-journal-remote.service**(8) — Receive journal messages over the network **
systemd-journal-remote.socket**(8) — Receive journal messages over the network **
systemd-journal-upload**(8) — Send journal messages over the network **
systemd-journal-upload.service**(8) — Send journal messages over the network **
systemd-journald**(8) — Journal service **
systemd-journald-audit.socket**(8) — Journal service **
systemd-journald-dev-log.socket**(8) — Journal service **
systemd-journald-varlink@.socket**(8) — Journal service **
systemd-journald.service**(8) — Journal service **
systemd-journald.socket**(8) — Journal service **
systemd-journald@.service**(8) — Journal service **
systemd-journald@.socket**(8) — Journal service **
systemd-kexec.service**(8) — System shutdown logic **
systemd-keyutil**(1) — Perform various operations on private keys and X.509 certificates **
systemd-localed**(8) — Locale bus mechanism **
systemd-localed.service**(8) — Locale bus mechanism **
systemd-logind**(8) — Login manager **
systemd-logind.service**(8) — Login manager **
systemd-machine-id-commit.service**(8) — Commit a transient machine ID to disk **
systemd-machine-id-setup**(1) — Initialize the machine ID in /etc/machine−id **
systemd-machined**(8) — Virtual machine and container registration manager **
systemd-machined.service**(8) — Virtual machine and container registration manager **
systemd-makefs**(8) — Creating and growing file systems on demand **
systemd-makefs@.service**(8) — Creating and growing file systems on demand **
systemd-measure**(1) — Pre−calculate and sign expected TPM2 PCR 11 values for booted unified kernel images **
systemd-mkswap@.service**(8) — Creating and growing file systems on demand **
systemd-modules-load**(8) — Load kernel modules at boot **
systemd-modules-load.service**(8) — Load kernel modules at boot **
systemd-mount**(1) — Establish and destroy transient mount or auto−mount points **
systemd-network-generator**(8) — Generate network configuration from the kernel command line **
systemd-network-generator.service**(8) — Generate network configuration from the kernel command line **
systemd-notify**(1) — Notify service manager about start−up completion and other daemon status changes **
systemd-nspawn**(1) — Spawn a command or OS in a lightweight container **
systemd-oomd**(8) — A userspace out−of−memory (OOM) killer **
systemd-oomd.service**(8) — A userspace out−of−memory (OOM) killer **
systemd-path**(1) — List and query system and user paths **
systemd-pcrextend**(8) — Measure boot phase into TPM2 PCR 11, machine ID and file system identity into PCR 15 **
systemd-pcrfs-root.service**(8) — Measure boot phase into TPM2 PCR 11, machine ID and file system identity into PCR 15 **
systemd-pcrfs@.service**(8) — Measure boot phase into TPM2 PCR 11, machine ID and file system identity into PCR 15 **
systemd-pcrlock**(8) — Analyze and predict TPM2 PCR states and generate an access policy from the prediction **
systemd-pcrlock-file-system.service**(8) — Analyze and predict TPM2 PCR states and generate an access policy from the prediction **
systemd-pcrlock-firmware-code.service**(8) — Analyze and predict TPM2 PCR states and generate an access policy from the prediction **
systemd-pcrlock-firmware-config.service**(8) — Analyze and predict TPM2 PCR states and generate an access policy from the prediction **
systemd-pcrlock-machine-id.service**(8) — Analyze and predict TPM2 PCR states and generate an access policy from the prediction **
systemd-pcrlock-make-policy.service**(8) — Analyze and predict TPM2 PCR states and generate an access policy from the prediction **
systemd-pcrlock-secureboot-authority.service**(8) — Analyze and predict TPM2 PCR states and generate an access policy from the prediction **
systemd-pcrlock-secureboot-policy.service**(8) — Analyze and predict TPM2 PCR states and generate an access policy from the prediction **
systemd-pcrmachine.service**(8) — Measure boot phase into TPM2 PCR 11, machine ID and file system identity into PCR 15 **
systemd-pcrphase-initrd.service**(8) — Measure boot phase into TPM2 PCR 11, machine ID and file system identity into PCR 15 **
systemd-pcrphase-sysinit.service**(8) — Measure boot phase into TPM2 PCR 11, machine ID and file system identity into PCR 15 **
systemd-pcrphase.service**(8) — Measure boot phase into TPM2 PCR 11, machine ID and file system identity into PCR 15 **
systemd-poweroff.service**(8) — System shutdown logic **
systemd-pstore**(8) — A service to archive contents of pstore **
systemd-pstore.service**(8) — A service to archive contents of pstore **
systemd-quotacheck**(8) — File system quota checker logic **
systemd-quotacheck.service**(8) — File system quota checker logic **
systemd-random-seed**(8) — Load and save the OS system random seed at boot and shutdown **
systemd-random-seed.service**(8) — Load and save the OS system random seed at boot and shutdown **
systemd-rc-local-generator**(8) — Compatibility generator and service to start /etc/rc.d/rc.local during boot **
systemd-reboot.service**(8) — System shutdown logic **
systemd-remount-fs**(8) — Remount root and kernel file systems **
systemd-remount-fs.service**(8) — Remount root and kernel file systems **
systemd-repart**(8) — Automatically grow and add partitions, and generate disk images (DDIs). **
systemd-repart.service**(8) — Automatically grow and add partitions, and generate disk images (DDIs). **
systemd-resolved**(8) — Network Name Resolution manager **
systemd-resolved.service**(8) — Network Name Resolution manager **
systemd-rfkill**(8) — Load and save the RF kill switch state at boot and change **
systemd-rfkill.service**(8) — Load and save the RF kill switch state at boot and change **
systemd-rfkill.socket**(8) — Load and save the RF kill switch state at boot and change **
systemd-run**(1) — Run programs in transient scope units, service units, or path−, socket−, or timer−triggered service units **
systemd-run-generator**(8) — Generator for invoking commands specified on the kernel command line as system service **
systemd-sbsign**(1) — Sign PE binaries for EFI Secure Boot **
systemd-shutdown**(8) — System shutdown logic **
systemd-sleep**(8) — System sleep state logic **
systemd-sleep.conf**(5) — Suspend and hibernation configuration file **
systemd-socket-activate**(1) — Test socket activation of daemons **
systemd-socket-proxyd**(8) — Bidirectionally proxy local sockets to another (possibly remote) socket **
systemd-soft-reboot.service**(8) — Userspace reboot operation **
systemd-ssh-generator**(8) — Generator for binding a socket−activated SSH server to local AF_VSOCK and AF_UNIX sockets **
systemd-ssh-proxy**(1) — SSH client plugin for connecting to AF_VSOCK and AF_UNIX sockets **
systemd-stdio-bridge**(1) — D−Bus proxy **
systemd-stub**(7) — A simple UEFI kernel boot stub **
systemd-suspend-then-hibernate.service**(8) — System sleep state logic **
systemd-suspend.service**(8) — System sleep state logic **
systemd-sysctl**(8) — Configure kernel parameters at boot **
systemd-sysctl.service**(8) — Configure kernel parameters at boot **
systemd-sysext**(8) — Activates System Extension Images **
systemd-sysext.service**(8) — Activates System Extension Images **
systemd-system-update-generator**(8) — Generator for redirecting boot to offline update mode **
systemd-system.conf**(5) — System and session service manager configuration files **
systemd-sysupdate**(8) — Automatically Update OS or Other Resources **
systemd-sysupdate-reboot.service**(8) — Automatically Update OS or Other Resources **
systemd-sysupdate-reboot.timer**(8) — Automatically Update OS or Other Resources **
systemd-sysupdate.service**(8) — Automatically Update OS or Other Resources **
systemd-sysupdate.timer**(8) — Automatically Update OS or Other Resources **
systemd-sysusers**(8) — Allocate system users and groups **
systemd-sysusers.service**(8) — Allocate system users and groups **
systemd-sysv-generator**(8) — Unit generator for SysV init scripts **
systemd-timedated**(8) — Time and date bus mechanism **
systemd-timedated.service**(8) — Time and date bus mechanism **
systemd-tmpfiles**(8) — Create, delete, and clean up files and directories **
systemd-tmpfiles-clean.service**(8) — Create, delete, and clean up files and directories **
systemd-tmpfiles-clean.timer**(8) — Create, delete, and clean up files and directories **
systemd-tmpfiles-setup-dev-early.service**(8) — Create, delete, and clean up files and directories **
systemd-tmpfiles-setup-dev.service**(8) — Create, delete, and clean up files and directories **
systemd-tmpfiles-setup.service**(8) — Create, delete, and clean up files and directories **
systemd-tpm2-generator**(8) — Generator for inserting TPM2 synchronization point in the boot process **
systemd-tpm2-setup**(8) — Set up the TPM2 Storage Root Key (SRK) at boot **
systemd-tpm2-setup-early.service**(8) — Set up the TPM2 Storage Root Key (SRK) at boot **
systemd-tpm2-setup.service**(8) — Set up the TPM2 Storage Root Key (SRK) at boot **
systemd-tty-ask-password-agent**(1) — List or process pending systemd password requests **
systemd-udev-settle.service**(8) — Wait for all pending udev events to be handled **
systemd-udevd**(8) — Device event managing daemon **
systemd-udevd-control.socket**(8) — Device event managing daemon **
systemd-udevd-kernel.socket**(8) — Device event managing daemon **
systemd-udevd.service**(8) — Device event managing daemon **
systemd-umount**(1) — Establish and destroy transient mount or auto−mount points **
systemd-update-done**(8) — Mark /etc/ and /var/ fully updated **
systemd-update-done.service**(8) — Mark /etc/ and /var/ fully updated **
systemd-update-utmp**(8) — Write audit and utmp updates at bootup, runlevel changes and shutdown **
systemd-update-utmp-runlevel.service**(8) — Write audit and utmp updates at bootup, runlevel changes and shutdown **
systemd-update-utmp.service**(8) — Write audit and utmp updates at bootup, runlevel changes and shutdown **
systemd-user-runtime-dir**(5) — System units to start the user manager **
systemd-user-sessions**(8) — Permit user logins after boot, prohibit user logins at shutdown **
systemd-user-sessions.service**(8) — Permit user logins after boot, prohibit user logins at shutdown **
systemd-user.conf**(5) — System and session service manager configuration files **
systemd-userdbd**(8) — JSON User/Group Record Query Multiplexer/NSS Compatibility **
systemd-userdbd.service**(8) — JSON User/Group Record Query Multiplexer/NSS Compatibility **
systemd-vconsole-setup**(8) — Configure the virtual consoles **
systemd-vconsole-setup.service**(8) — Configure the virtual consoles **
systemd-veritysetup**(8) — Disk verity protection logic **
systemd-veritysetup-generator**(8) — Unit generator for verity protected block devices **
systemd-veritysetup@.service**(8) — Disk verity protection logic **
systemd-volatile-root**(8) — Make the root file system volatile **
systemd-volatile-root.service**(8) — Make the root file system volatile **
systemd-vpick**(1) — Resolve paths to .v/ versioned directories **
systemd-xdg-autostart-generator**(8) — User unit generator for XDG autostart files **
systemd.automount**(5) — Automount unit configuration **
systemd.device**(5) — Device unit configuration **
systemd.directives**(7) — Index of configuration directives **
systemd.dnssd**(5) — DNS−SD configuration **
systemd.environment-generator**(7) — systemd environment file generators **
systemd.exec**(5) — Execution environment configuration **
systemd.generator**(7) — systemd unit generators **
systemd.image-policy**(7) — Disk Image Dissection Policy **
systemd.journal-fields**(7) — Special journal fields **
systemd.kill**(5) — Process killing procedure configuration **
systemd.link**(5) — Network device configuration **
systemd.mount**(5) — Mount unit configuration **
systemd.negative**(5) — DNSSEC trust anchor configuration files **
systemd.net-naming-scheme**(7) — Network device naming schemes **
systemd.nspawn**(5) — Container settings **
systemd.offline-updates**(7) — Implementation of offline updates in systemd **
systemd.path**(5) — Path unit configuration **
systemd.pcrlock**(5) — PCR measurement prediction files **
systemd.pcrlock.d**(5) — PCR measurement prediction files **
systemd.positive**(5) — DNSSEC trust anchor configuration files **
systemd.preset**(5) — Service enablement presets **
systemd.resource-control**(5) — Resource control unit settings **
systemd.scope**(5) — Scope unit configuration **
systemd.service**(5) — Service unit configuration **
systemd.slice**(5) — Slice unit configuration **
systemd.socket**(5) — Socket unit configuration **
systemd.special**(7) — Special systemd units **
systemd.swap**(5) — Swap unit configuration **
systemd.syntax**(7) — General syntax of systemd configuration files **
systemd.system-credentials**(7) — System Credentials **
systemd.target**(5) — Target unit configuration **
systemd.time**(7) — Time and date specifications **
systemd.timer**(5) — Timer unit configuration **
systemd.unit**(5) — Unit configuration **
systemd.v**(7) — Directory with Versioned Resources **
sysupdate.d**(5) — Transfer Definition Files for Automatic Updates **
sysupdate.features**(5) — Definition Files for Optional Features **
sysusers.d**(5) — Declarative allocation of system users and groups

T

telinit(8) — Change SysV runlevel **
timedatectl**(1) — Control the system time and date **
tmpfiles.d**(5) — Configuration for creation, deletion, and cleaning of files and directories

U

udev(7) — Dynamic device management **
udev.conf**(5) — Configuration for device event managing daemon **
udev.conf.d**(5) — Configuration for device event managing daemon **
udev_device_get_action**(3) — Query device properties **
udev_device_get_current_tags_list_entry**(3) — Retrieve or set device attributes **
udev_device_get_devlinks_list_entry**(3) — Retrieve or set device attributes **
udev_device_get_devnode**(3) — Query device properties **
udev_device_get_devnum**(3) — Query device properties **
udev_device_get_devpath**(3) — Query device properties **
udev_device_get_devtype**(3) — Query device properties **
udev_device_get_driver**(3) — Query device properties **
udev_device_get_is_initialized**(3) — Query device properties **
udev_device_get_parent**(3) — Query device properties **
udev_device_get_parent_with_subsystem_devtype**(3) — Query device properties **
udev_device_get_properties_list_entry**(3) — Retrieve or set device attributes **
udev_device_get_property_value**(3) — Retrieve or set device attributes **
udev_device_get_subsystem**(3) — Query device properties **
udev_device_get_sysattr_list_entry**(3) — Retrieve or set device attributes **
udev_device_get_sysattr_value**(3) — Retrieve or set device attributes **
udev_device_get_sysname**(3) — Query device properties **
udev_device_get_sysnum**(3) — Query device properties **
udev_device_get_syspath**(3) — Query device properties **
udev_device_get_tags_list_entry**(3) — Retrieve or set device attributes **
udev_device_get_udev**(3) — Query device properties **
udev_device_has_current_tag**(3) — Retrieve or set device attributes **
udev_device_has_tag**(3) — Retrieve or set device attributes **
udev_device_new_from_device_id**(3) — Create, acquire and release a udev device object **
udev_device_new_from_devnum**(3) — Create, acquire and release a udev device object **
udev_device_new_from_environment**(3) — Create, acquire and release a udev device object **
udev_device_new_from_subsystem_sysname**(3) — Create, acquire and release a udev device object **
udev_device_new_from_syspath**(3) — Create, acquire and release a udev device object **
udev_device_ref**(3) — Create, acquire and release a udev device object **
udev_device_set_sysattr_value**(3) — Retrieve or set device attributes **
udev_device_unref**(3) — Create, acquire and release a udev device object **
udev_enumerate_add_match_is_initialized**(3) — Modify filters **
udev_enumerate_add_match_parent**(3) — Modify filters **
udev_enumerate_add_match_property**(3) — Modify filters **
udev_enumerate_add_match_subsystem**(3) — Modify filters **
udev_enumerate_add_match_sysattr**(3) — Modify filters **
udev_enumerate_add_match_sysname**(3) — Modify filters **
udev_enumerate_add_match_tag**(3) — Modify filters **
udev_enumerate_add_nomatch_subsystem**(3) — Modify filters **
udev_enumerate_add_nomatch_sysattr**(3) — Modify filters **
udev_enumerate_add_syspath**(3) — Query or modify a udev enumerate object **
udev_enumerate_get_list_entry**(3) — Query or modify a udev enumerate object **
udev_enumerate_get_udev**(3) — Query or modify a udev enumerate object **
udev_enumerate_new**(3) — Create, acquire and release a udev enumerate object **
udev_enumerate_ref**(3) — Create, acquire and release a udev enumerate object **
udev_enumerate_scan_devices**(3) — Query or modify a udev enumerate object **
udev_enumerate_scan_subsystems**(3) — Query or modify a udev enumerate object **
udev_enumerate_unref**(3) — Create, acquire and release a udev enumerate object **
udev_list_entry**(3) — Iterate and access udev lists **
udev_list_entry_get_by_name**(3) — Iterate and access udev lists **
udev_list_entry_get_name**(3) — Iterate and access udev lists **
udev_list_entry_get_next**(3) — Iterate and access udev lists **
udev_list_entry_get_value**(3) — Iterate and access udev lists **
udev_monitor_enable_receiving**(3) — Query and modify device monitor **
udev_monitor_filter_add_match_subsystem_devtype**(3) — Modify filters **
udev_monitor_filter_add_match_tag**(3) — Modify filters **
udev_monitor_filter_remove**(3) — Modify filters **
udev_monitor_filter_update**(3) — Modify filters **
udev_monitor_get_fd**(3) — Query and modify device monitor **
udev_monitor_get_udev**(3) — Query and modify device monitor **
udev_monitor_new_from_netlink**(3) — Create, acquire and release a udev monitor object **
udev_monitor_receive_device**(3) — Query and modify device monitor **
udev_monitor_ref**(3) — Create, acquire and release a udev monitor object **
udev_monitor_set_receive_buffer_size**(3) — Query and modify device monitor **
udev_monitor_unref**(3) — Create, acquire and release a udev monitor object **
udev_new**(3) — Create, acquire and release a udev context object **
udev_ref**(3) — Create, acquire and release a udev context object **
udev_unref**(3) — Create, acquire and release a udev context object **
udevadm**(8) — udev management tool **
ukify**(1) — Combine components into a signed Unified Kernel Image for UEFI systems **
user-runtime-dir@.service**(5) — System units to start the user manager **
user.conf.d**(5) — System and session service manager configuration files **
user@.service**(5) — System units to start the user manager **
userdbctl**(1) — Inspect users, groups and group memberships

V

varlinkctl(1) — Introspect with and invoke Varlink services **
vconsole.conf**(5) — Configuration file for the virtual console **
veritytab**(5) — Configuration for verity block devices

SEE ALSO

systemd.directives(7)

This index contains 1147 entries, referring to 391 individual manual pages.

---