Section 1 · User commands
User commands: D
Programs and shell commands.
471 pages · D
- danetool.1 GnuTLS DANE tool
- date.1 print or set the system date and time
- dav_reconstruct.1 Cyrus IMAP documentation
- daxctl-create-device.1 Create a devdax device
- daxctl-destroy-device.1 Destroy a devdax device
- daxctl-disable-device.1 Disables a devdax device
- daxctl-enable-device.1 Enable a devdax device
- daxctl-list.1 dump the platform Device−DAX regions, devices, and attributes in json.
- daxctl-migrate-device-model.1 Opt−in to the /sys/bus/dax device−model, allow for alternative Device−DAX instance drivers.
- daxctl-offline-memory.1 Offline the memory for a device that is in system−ram mode
- daxctl-online-memory.1 Online the memory for a device that is in system−ram mode
- daxctl-reconfigure-device.1 Reconfigure a dax device into a different mode
- daxctl.1 Provides enumeration and provisioning commands for the Linux kernel Device−DAX facility
- dbilogstrip.1 filter to normalize DBI trace logs for diff’ing
- dbiprof.1 command−line client for DBI::ProfileData
- dbpmda.1 debugger for Performance Co-Pilot PMDAs
- dbprobe.1 database response time and availability information
- dbscan.1 scans a Directory Server database index file and dumps the contents
- dbus-broker-launch.1 Launcher for D-Bus Message Brokers
- dbus-broker.1 D-Bus message broker
- dbus-cleanup-sockets.1 clean up leftover sockets in a directory
- dbus-daemon.1 Message bus daemon
- dbus-launch.1 Utility to start a message bus from a shell script
- dbus-monitor.1 debug probe to print message bus messages
- dbus-run-session.1 start a process as a new D−Bus session
- dbus-send.1 Send a message to a message bus
- dbus-test-tool.1 D−Bus traffic generator and test tool
- dbus-update-activation-environment.1 update environment used for D−Bus session services
- dbus-uuidgen.1 Utility to generate UUIDs
- dbwrap_tool.1 low level TDB/CTDB manipulation tool using the dbwrap interface
- dbxtool.1 modify the dbx revocation list
- dc.1 an arbitrary precision calculator
- dconf-editor.1 Graphical editor for gsettings and dconf
- dconf-service.1 D−Bus service for writes to the dconf database
- dconf.1 Simple tool for manipulating a dconf database
- dcraw.1 command-line decoder for raw digital photos
- dd.1 convert and copy a file
- ddbugtopbm.1 convert Diddle or DiddleBug sketches to PBM files
- ddiskit.1 Red Hat tool for Driver Update Disk creation
- deallocvt.1 deallocate unused virtual consoles
- debugedit.1 debug source path manipulation tool
- debuginfo-install.1 redirecting to DNF debuginfo-install Plugin
- debuginfod-find.1 request debuginfo-related data
- declare.1 bash built-in commands, see bash(1)
- decode-dimms.1 decode the information found in memory module SPD EEPROMs
- decode-vaio.1 decode the information found in the Sony Vaio laptop identification EEPROMs
- dehtmldiff.1 get usable diff from an HTML page
- deliver.1 Dovecot's local mail delivery agent
- delv.1 DNS lookup and validation utility
- derb.1 disassemble a resource bundle
- derdump.1 Dumps C−sequence strings from a DER encoded certificate file
- desktop-file-edit.1 Installation and edition of desktop files
- desktop-file-install.1 Installation and edition of desktop files
- desktop-file-validate.1 Validate desktop entry files
- df.1 report file system space usage
- dgst.1ossl Linux manual page for dgst.1ossl.
- dhcp_lease_time.1 Query remaining time of a lease on a the local dnsmasq DHCP server.
- dhcp_release.1 Release a DHCP lease on a the local dnsmasq DHCP server.
- dhcp_release6.1 Release a DHCPv6 lease on a the local dnsmasq DHCP server.
- dhcpclient.1 Send a DHCP request with provided RADIUS attributes and get the output response.
- dhparam.1ossl Linux manual page for dhparam.1ossl.
- diagtool.1 clang diagnostics tool
- dialog.1 display dialog boxes from shell scripts
- diff-jars.1 output the differences between two JAR files
- diff.1 compare files line by line
- diff3.1 compare three files line by line
- diffimg.1 Calculates intersection between two images
- diffpp.1 pretty−print diff outputs with GNU enscript
- diffstat.1 make histogram from diff-output
- dig.1 DNS lookup utility
- dijkstra.1 single-source distance filter for Graphviz
- dir.1 list directory contents
- dircolors.1 color setup for ls
- dirmngr-client.1 Tool to access the Dirmngr services
- dirname.1 strip last component from file name
- dirs.1 bash built-in commands, see bash(1)
- dislocate.1 disconnect and reconnect processes
- disown.1 bash built-in commands, see bash(1)
- djpeg.1 decompress a JPEG file to an image file
- dkvis.1 visualize disk I/O activity and performance
- dltest.1 A simple library symbol test program
- dm_date.1 print out the system date and time
- dm_zdump.1 timezone dumper
- dmesg.1 print or control the kernel ring buffer
- dnf-utils.1 classic YUM utilities implemented as CLI shims on top of DNF
- dnie-tool.1 displays information about DNIe based security tokens
- dnsdomainname.1 Linux manual page for dnsdomainname.1.
- dnssec-cds.1 change DS records for a child zone based on CDS/CDNSKEY
- dnssec-dsfromkey.1 DNSSEC DS RR generation tool
- dnssec-importkey.1 import DNSKEY records from external systems so they can be managed
- dnssec-keyfromlabel.1 DNSSEC key generation tool
- dnssec-keygen.1 DNSSEC key generation tool
- dnssec-revoke.1 set the REVOKED bit on a DNSSEC key
- dnssec-settime.1 set the key timing metadata for a DNSSEC key
- dnssec-signzone.1 DNSSEC zone signing tool
- dnssec-verify.1 DNSSEC zone verification tool
- dnstap-read.1 print dnstap data in human-readable form
- docker-artifact-add.1 Add an OCI artifact to the local store
- docker-artifact-inspect.1 Inspect an OCI artifact
- docker-artifact-ls.1 List OCI artifacts in local store
- docker-artifact-pull.1 Pulls an artifact from a registry and stores it locally
- docker-artifact-push.1 Push an OCI artifact from local storage to an image registry
- docker-artifact-rm.1 Remove an OCI from local storage
- docker-artifact.1 Manage OCI artifacts
- docker-attach.1 Attach to a running container
- docker-auto-update.1 Auto update containers according to their auto-update policy
- docker-build.1 Build a container image using a Containerfile
- docker-commit.1 Create new image based on the changed container
- docker-completion.1 Generate shell completion scripts
- docker-compose.1 Run Compose workloads via an external compose provider
- docker-container-attach.1 Attach to a running container
- docker-container-checkpoint.1 Checkpoint one or more running containers
- docker-container-cleanup.1 Clean up the container’s network and mountpoints
- docker-container-clone.1 Create a copy of an existing container
- docker-container-commit.1 Create new image based on the changed container
- docker-container-cp.1 Copy files/folders between a container and the local filesystem
- docker-container-create.1 Create a new container
- docker-container-diff.1 Inspect changes on a container’s filesystem
- docker-container-exec.1 Execute a command in a running container
- docker-container-exists.1 Check if a container exists in local storage
- docker-container-export.1 Export a container’s filesystem contents as a tar archive
- docker-container-init.1 Initialize one or more containers
- docker-container-inspect.1 Display a container’s configuration
- docker-container-kill.1 Kill the main process in one or more containers
- docker-container-list.1 Print out information about containers
- docker-container-logs.1 Display the logs of one or more containers
- docker-container-ls.1 Print out information about containers
- docker-container-mount.1 Mount a working container’s root filesystem
- docker-container-pause.1 Pause one or more containers
- docker-container-port.1 List port mappings for a container
- docker-container-prune.1 Remove all stopped containers from local storage
- docker-container-ps.1 Print out information about containers
- docker-container-rename.1 Rename an existing container
- docker-container-restart.1 Restart one or more containers
- docker-container-restore.1 Restore one or more containers from a checkpoint
- docker-container-rm.1 Remove one or more containers
- docker-container-run.1 Run a command in a new container
- docker-container-runlabel.1 Execute a command as described by a container-image label
- docker-container-start.1 Start one or more containers
- docker-container-stats.1 Display a live stream of one or more container’s resource usage statistics
- docker-container-stop.1 Stop one or more running containers
- docker-container-top.1 Display the running processes of a container
- docker-container-umount.1 Unmount a working container’s root filesystem
- docker-container-unmount.1 Unmount a working container’s root filesystem
- docker-container-unpause.1 Unpause one or more containers
- docker-container-update.1 Update the configuration of a given container
- docker-container-wait.1 Wait on one or more containers to stop and print their exit codes
- docker-container.1 Manage containers
- docker-cp.1 Copy files/folders between a container and the local filesystem
- docker-create.1 Create a new container
- docker-diff.1 Inspect changes on a container or image’s filesystem
- docker-events.1 Monitor Podman events
- docker-exec.1 Execute a command in a running container
- docker-export.1 Export a container’s filesystem contents as a tar archive
- docker-farm-build.1 Build images on farm nodes, then bundle them into a manifest list
- docker-farm-create.1 Create a new farm
- docker-farm-list.1 List the existing farms
- docker-farm-remove.1 Delete one or more farms
- docker-farm-update.1 Update an existing farm
- docker-farm.1 Farm out builds to machines running podman for different architectures
- docker-generate-kube.1 Generate Kubernetes YAML based on containers, pods or volumes
- docker-generate-spec.1 Generate Specgen JSON based on containers or pods
- docker-generate-systemd.1 \[DEPRECATED\] Generate systemd unit file(s) for a container or pod
- docker-generate.1 Generate structured data based on containers, pods or volumes
- docker-healthcheck-run.1 Run a container healthcheck
- docker-healthcheck.1 Manage healthchecks for containers
- docker-help.1 Simple management tool for pods, containers and images
- docker-history.1 Show the history of an image
- docker-image-build.1 Build a container image using a Containerfile
- docker-image-diff.1 Inspect changes on an image’s filesystem
- docker-image-exists.1 Check if an image exists in local storage
- docker-image-history.1 Show the history of an image
- docker-image-import.1 Import a tarball and save it as a filesystem image
- docker-image-inspect.1 Display an image’s configuration
- docker-image-list.1 List images in local storage
- docker-image-load.1 Load image(s) from a tar archive into container storage
- docker-image-ls.1 List images in local storage
- docker-image-mount.1 Mount an image’s root filesystem
- docker-image-prune.1 Remove all unused images from the local store
- docker-image-pull.1 Pull an image from a registry
- docker-image-push.1 Push an image, manifest list or image index from local storage to elsewhere
- docker-image-rm.1 Remove one or more locally stored images
- docker-image-save.1 Save image(s) to an archive
- docker-image-scp.1 Securely copy an image from one host to another
- docker-image-search.1 Search a registry for an image
- docker-image-sign.1 Create a signature for an image
- docker-image-tag.1 Add an additional name to a local image
- docker-image-tree.1 Print layer hierarchy of an image in a tree format
- docker-image-trust.1 Manage container registry image trust policy
- docker-image-umount.1 Unmount an image’s root filesystem
- docker-image-unmount.1 Unmount an image’s root filesystem
- docker-image-untag.1 Remove one or more names from a locally-stored image
- docker-image.1 Manage images
- docker-images.1 List images in local storage
- docker-import.1 Import a tarball and save it as a filesystem image
- docker-info.1 Display Podman related system information
- docker-init.1 Initialize one or more containers
- docker-inspect.1 Display a container, image, volume, network, or pod’s configuration
- docker-kill.1 Kill the main process in one or more containers
- docker-kube-apply.1 Apply Kubernetes YAML based on containers, pods, or volumes to a Kubernetes cluster
- docker-kube-down.1 Remove containers and pods based on Kubernetes YAML
- docker-kube-generate.1 Generate Kubernetes YAML based on containers, pods or volumes
- docker-kube-play.1 Create containers, pods and volumes based on Kubernetes YAML
- docker-kube.1 Play containers, pods or volumes based on a structured input file
- docker-load.1 Load image(s) from a tar archive into container storage
- docker-login.1 Log in to a container registry
- docker-logout.1 Log out of a container registry
- docker-logs.1 Display the logs of one or more containers
- docker-machine-info.1 Display machine host info
- docker-machine-init.1 Initialize a new virtual machine
- docker-machine-inspect.1 Inspect one or more virtual machines
- docker-machine-list.1 List virtual machines
- docker-machine-ls.1 List virtual machines
- docker-machine-os-apply.1 Apply an OCI image to a Podman Machine’s OS
- docker-machine-os.1 Manage a Podman virtual machine’s OS
- docker-machine-reset.1 Reset Podman machines and environment
- docker-machine-rm.1 Remove a virtual machine
- docker-machine-set.1 Set a virtual machine setting
- docker-machine-ssh.1 SSH into a virtual machine
- docker-machine-start.1 Start a virtual machine
- docker-machine-stop.1 Stop a virtual machine
- docker-machine.1 Manage Podman’s virtual machine
- docker-manifest-add.1 Add an image or artifact to a manifest list or image index
- docker-manifest-annotate.1 Add and update information about an image or artifact in a manifest list or image index
- docker-manifest-create.1 Create a manifest list or image index
- docker-manifest-exists.1 Check if the given manifest list exists in local storage
- docker-manifest-inspect.1 Display a manifest list or image index
- docker-manifest-push.1 Push a manifest list or image index to a registry
- docker-manifest-remove.1 Remove an item from a manifest list or image index
- docker-manifest-rm.1 Remove manifest list or image index from local storage
- docker-manifest.1 Create and manipulate manifest lists and image indexes
- docker-mount.1 Mount a working container’s root filesystem
- docker-network-connect.1 Connect a container to a network
- docker-network-create.1 Create a Podman network
- docker-network-disconnect.1 Disconnect a container from a network
- docker-network-exists.1 Check if the given network exists
- docker-network-inspect.1 Display the network configuration for one or more networks
- docker-network-ls.1 Display a summary of networks
- docker-network-prune.1 Remove all unused networks
- docker-network-reload.1 Reload network configuration for containers
- docker-network-rm.1 Remove one or more networks
- docker-network-update.1 Update an existing Podman network
- docker-network.1 Manage Podman networks
- docker-pause.1 Pause one or more containers
- docker-play-kube.1 Create containers, pods and volumes based on Kubernetes YAML
- docker-pod-clone.1 Create a copy of an existing pod
- docker-pod-create.1 Create a new pod
- docker-pod-exists.1 Check if a pod exists in local storage
- docker-pod-inspect.1 Display information describing a pod
- docker-pod-kill.1 Kill the main process of each container in one or more pods
- docker-pod-logs.1 Display logs for pod with one or more containers
- docker-pod-pause.1 Pause one or more pods
- docker-pod-prune.1 Remove all stopped pods and their containers
- docker-pod-ps.1 Print out information about pods
- docker-pod-restart.1 Restart one or more pods
- docker-pod-rm.1 Remove one or more stopped pods and containers
- docker-pod-start.1 Start one or more pods
- docker-pod-stats.1 Display a live stream of resource usage stats for containers in one or more pods
- docker-pod-stop.1 Stop one or more pods
- docker-pod-top.1 Display the running processes of containers in a pod
- docker-pod-unpause.1 Unpause one or more pods
- docker-pod.1 Management tool for groups of containers, called pods
- docker-port.1 List port mappings for a container
- docker-ps.1 Print out information about containers
- docker-pull.1 Pull an image from a registry
- docker-push.1 Push an image, manifest list or image index from local storage to elsewhere
- docker-remote.1 A remote CLI for Podman: A Simple management tool for pods, containers and images.
- docker-rename.1 Rename an existing container
- docker-restart.1 Restart one or more containers
- docker-rm.1 Remove one or more containers
- docker-rmi.1 Remove one or more locally stored images
- docker-run.1 Run a command in a new container
- docker-save.1 Save image(s) to an archive
- docker-search.1 Search a registry for an image
- docker-secret-create.1 Create a new secret
- docker-secret-exists.1 Check if the given secret exists
- docker-secret-inspect.1 Display detailed information on one or more secrets
- docker-secret-ls.1 List all available secrets
- docker-secret-rm.1 Remove one or more secrets
- docker-secret.1 Manage podman secrets
- docker-start.1 Start one or more containers
- docker-stats.1 Display a live stream of one or more container’s resource usage statistics
- docker-stop.1 Stop one or more running containers
- docker-system-check.1 Perform consistency checks on image and container storage
- docker-system-connection-add.1 Record destination for the Podman service
- docker-system-connection-default.1 Set named destination as default for the Podman service
- docker-system-connection-list.1 List the destination for the Podman service(s)
- docker-system-connection-remove.1 Delete named destination
- docker-system-connection-rename.1 Rename the destination for Podman service
- docker-system-connection.1 Manage the destination(s) for Podman service(s)
- docker-system-df.1 Show podman disk usage
- docker-system-events.1 Monitor Podman events
- docker-system-info.1 Display Podman related system information
- docker-system-migrate.1 Migrate existing containers to a new podman version
- docker-system-prune.1 Remove all unused pods, containers, images, networks, and volume data
- docker-system-renumber.1 Migrate lock numbers to handle a change in maximum number of locks
- docker-system-reset.1 Reset storage back to initial state
- docker-system-service.1 Run an API service
- docker-system.1 Manage podman
- docker-tag.1 Add an additional name to a local image
- docker-top.1 Display the running processes of a container
- docker-umount.1 Unmount a working container’s root filesystem
- docker-unmount.1 Unmount a working container’s root filesystem
- docker-unpause.1 Unpause one or more containers
- docker-unshare.1 Run a command inside of a modified user namespace
- docker-untag.1 Remove one or more names from a locally-stored image
- docker-update.1 Update the configuration of a given container
- docker-version.1 Display the Podman version information
- docker-volume-create.1 Create a new volume
- docker-volume-exists.1 Check if the given volume exists
- docker-volume-export.1 Export volume to external tar
- docker-volume-import.1 Import tarball contents into an existing podman volume
- docker-volume-inspect.1 Get detailed information on one or more volumes
- docker-volume-ls.1 List all the available volumes
- docker-volume-mount.1 Mount a volume filesystem
- docker-volume-prune.1 Remove all unused volumes
- docker-volume-reload.1 Reload all volumes from volumes plugins
- docker-volume-rm.1 Remove one or more volumes
- docker-volume-unmount.1 Unmount a volume
- docker-volume.1 Simple management tool for volumes
- docker-wait.1 Wait on one or more containers to stop and print their exit codes
- docker.1 Simple management tool for pods, containers and images
- dockersh.1 Documentation is unavailable for this packaged alias.
- domainname.1 Linux manual page for domainname.1.
- dos2unix.1 DOS/Mac to Unix and vice versa text file format converter
- dot.1 filter for drawing directed graphs
- dot2gxl.1 Linux manual page for dot2gxl.1.
- dotnet-add-package.1 Adds or updates a package reference in a project file.
- dotnet-add-reference.1 Adds project-to-project (P2P) references.
- dotnet-build-server.1 Interacts with servers started by a build.
- dotnet-build.1 Builds a project and all of its dependencies.
- dotnet-clean.1 Cleans the output of a project.
- dotnet-dev-certs.1 Generates a self-signed certificate to enable HTTPS use in development.
- dotnet-format.1 Formats code to match editorconfig settings.
- dotnet-help.1 Shows more detailed documentation online for the specified command.
- dotnet-list-package.1 Lists the package references for a project or solution.
- dotnet-list-reference.1 Lists project-to-project references.
- dotnet-migrate.1 Migrates a Preview 2 .NET Core project to a .NET Core SDK-style project.
- dotnet-msbuild.1 Builds a project and all of its dependencies. Note: A solution or project file may need to be specified if there are multiple.
- dotnet-new-details.1 Displays template package metadata.
- dotnet-new-install.1 installs a template package.
- dotnet-new-list.1 Lists available templates to be run using dotnet-new.
- dotnet-new-search.1 searches for the templates supported by dotnet-new on NuGet.org.
- dotnet-new-uninstall.1 uninstalls a template package.
- dotnet-new-update.1 updates installed template packages.
- dotnet-new.1 Creates a new project, configuration file, or solution based on the specified template.
- dotnet-nuget-add-source.1 Add a NuGet source.
- dotnet-nuget-config-get.1 Gets the NuGet configuration settings that will be applied.
- dotnet-nuget-config-paths.1 Lists nuget configuration files currently being appplied to a directory.
- dotnet-nuget-config-set.1 Set the value of a specified NuGet configuration setting.
- dotnet-nuget-config-unset.1 Removes the key-value pair from a specified NuGet configuration setting.
- dotnet-nuget-delete.1 Deletes or unlists a package from the server.
- dotnet-nuget-disable-source.1 Disable a NuGet source.
- dotnet-nuget-enable-source.1 Enable a NuGet source.
- dotnet-nuget-list-source.1 Lists all configured NuGet sources.
- dotnet-nuget-locals.1 Clears or lists local NuGet resources.
- dotnet-nuget-push.1 Pushes a package to the server and publishes it.
- dotnet-nuget-remove-source.1 Remove a NuGet source.
- dotnet-nuget-sign.1 Signs all the NuGet packages matching the first argument with a certificate.
- dotnet-nuget-trust.1 Gets or sets trusted signers to the NuGet configuration.
- dotnet-nuget-update-source.1 Update a NuGet source.
- dotnet-nuget-verify.1 Verifies a signed NuGet package.
- dotnet-nuget-why.1 Shows the dependency graph for a particular package.
- dotnet-pack.1 Packs the code into a NuGet package.
- dotnet-package-search.1 Searches for a NuGet package.
- dotnet-publish.1 Publishes the application and its dependencies to a folder for deployment to a hosting system.
- dotnet-remove-package.1 Removes package reference from a project file.
- dotnet-remove-reference.1 Removes project-to-project (P2P) references.
- dotnet-restore.1 Restores the dependencies and tools of a project.
- dotnet-run.1 Runs source code without any explicit compile or launch commands.
- dotnet-sdk-check.1 Lists the latest available version of the .NET SDK and .NET Runtime, for each feature band.
- dotnet-sln.1 Lists or modifies the projects in a .NET solution file.
- dotnet-store.1 Stores the specified assemblies in the runtime package store.
- dotnet-test.1 .NET test driver used to execute unit tests.
- dotnet-tool-install.1 Installs the specified .NET tool on your machine.
- dotnet-tool-list.1 Lists all .NET tools of the specified type currently installed on your machine.
- dotnet-tool-restore.1 Installs the .NET local tools that are in scope for the current directory.
- dotnet-tool-run.1 Invokes a local tool.
- dotnet-tool-search.1 Searches all .NET tools that are published to NuGet.
- dotnet-tool-uninstall.1 Uninstalls the specified .NET tool from your machine.
- dotnet-tool-update.1 Updates the specified .NET tool on your machine.
- dotnet-vstest.1 Runs tests from the specified assemblies.
- dotnet-watch.1 Restarts or hot reloads the specified application, or runs a specified dotnet command, when changes in source code are detected.
- dotnet-workload-config.1 Enables or disables workload-set update mode.
- dotnet-workload-install.1 Installs optional workloads.
- dotnet-workload-list.1 Lists installed workloads.
- dotnet-workload-repair.1 Repairs workloads installations.
- dotnet-workload-restore.1 Installs workloads needed for a project or a solution.
- dotnet-workload-search.1 Searches for optional workloads.
- dotnet-workload-sets.1 Linux manual page for dotnet-workload-sets.1.
- dotnet-workload-uninstall.1 Uninstalls a specified workload.
- dotnet-workload-update.1 Updates installed workloads.
- dotnet-workload.1 Provides information about the available workload commands and installed workloads.
- dotnet.1 The generic driver for the .NET CLI.
- doveadm-acl.1 Manage Access Control List (ACL)
- doveadm-altmove.1 Move matching mails to the alternative storage (dbox−only)
- doveadm-auth.1 Flush/lookup/test authentication data
- doveadm-backup.1 Dovecot's two−way mailbox synchronization utility
- doveadm-batch.1 Execute multiple commands for multiple users
- doveadm-config.1 Dovecot's configuration dumping utility
- doveadm-copy.1 Move messages matching the given search query into another mailbox
- doveadm-deduplicate.1 expunge duplicate messages
- doveadm-director.1 Manage Dovecot directors
- doveadm-dump.1 Dump the content of Dovecot's binary mailbox index/log
- doveadm-exec.1 easily execute commands from Dovecot's libexec_dir
- doveadm-expunge.1 Expunge messages matching given search query
- doveadm-fetch.1 Fetch partial/full messages or message information
- doveadm-flags.1 add, remove or replace messages' flags
- doveadm-force-resync.1 Repair broken mailboxes
- doveadm-fs.1 Interact with the abstract mail storage filesystem
- doveadm-fts.1 Manipulate the Full Text Search (FTS) index
- doveadm-help.1 Show information about doveadm commands
- doveadm-import.1 Import messages matching given search query
- doveadm-index.1 Index mailboxes
- doveadm-instance.1 Manage the list of running Dovecot instances
- doveadm-kick.1 Disconnect users by user name and/or IP address
- doveadm-log.1 Locate, test or reopen Dovecot's log files
- doveadm-mailbox-cryptokey.1 Mail crypt plugin management
- doveadm-mailbox.1 Commands related to handling mailboxes
- doveadm-move.1 Move messages matching the given search query into another mailbox
- doveadm-penalty.1 Show current penalties
- doveadm-proxy.1 Handle Dovecot proxy connections
- doveadm-purge.1 Remove messages with refcount=0 from mdbox files
- doveadm-pw.1 Dovecot's password hash generator
- doveadm-quota.1 Initialize/recalculate or show current quota usage
- doveadm-rebuild.1 Commands related to rebuilding various aspects of mails matching given search query.
- doveadm-reload.1 Dovecot's administration utility
- doveadm-replicator.1 Manage users' mail replication
- doveadm-save.1 Save email to a user’s mailbox
- doveadm-search.1 Show a list of mailbox GUIDs and message UIDs matching given search query.
- doveadm-sieve.1 Commands related to handling Sieve scripts
- doveadm-stats.1 Inspect or reset stats
- doveadm-stop.1 Dovecot's administration utility
- doveadm-sync.1 Dovecot's two−way mailbox synchronization utility
- doveadm-user.1 Perform a user lookup in Dovecot's userdbs
- doveadm-who.1 Show who is logged in to the Dovecot server
- doveadm.1 Dovecot's administration utility
- doveconf.1 Dovecot's configuration dumping utility
- dovecot-lda.1 Dovecot's local mail delivery agent
- dovecot-sysreport.1 Dovecot's system report utility
- dovecot.1 a secure and highly configurable IMAP and POP3 server
- dpauxmon.1 Provide interfaces to capture DisplayPort AUX channel data.
- driverless.1 PPD generator utility for driverless printing
- dropdb.1 remove a PostgreSQL database
- dropuser.1 remove a PostgreSQL user account
- ds-logpipe.py.1 Create and read from a named pipe instead of a log file
- ds-replcheck.1 ds-replcheck
- dsa.1ossl Linux manual page for dsa.1ossl.
- dsaparam.1ossl Linux manual page for dsaparam.1ossl.
- dstat.1 Linux manual page for dstat.1.
- dsymutil.1 manipulate archived DWARF debug symbol files
- dsync.1 Dovecot's two−way mailbox synchronization utility
- dtrace.1 Dtrace compatible user application static probe generation tool.
- dtrust-tool.1 displays information about D−Trust signature cards and remove the transport protection
- du.1 estimate file space usage
- dump.erofs.1 retrieve directory and file entries, show specific file or overall disk statistics information from an EROFS-formatted image.
- dumpcap.1 Dump network traffic
- dumpkeys.1 dump keyboard translation tables
- dvi2fax.1 convert a TeX DVI file to G3 fax format
- dvigif.1 A DVI−to−PNG translator
- dvilualatex-dev.1 release candidate LaTeX testing
- dviluatex.1 An extended version of TeX using Lua as an embedded scripting language
- dvipdfm.1 produce PDF files directly from DVI files
- dvipdfmx.1 produce PDF files directly from DVI files
- dvipdft.1 create thumbnail images for use with dvipdfm
- dvipng.1 A DVI−to−PNG translator
- dvips.1 convert a TeX DVI file to PostScript
- dvired.1 print dvi-files
- dvisvgm.1 converts DVI, EPS, and PDF files to the XML−based SVG format
- dvitomp.1 convert a TeX DVI file to a MetaPost MPXFILE
- dwz.1 DWARF optimization and duplicate removal tool